Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant DL145 Gen11: an edge server on AMD EPYC 8004

Servix technical team · Updated

In brief. DL145 Gen11 is an HPE server platform for edge sites: one AMD EPYC 8004 (Siena) processor, a 2U chassis of reduced depth, an extended operating temperature range and room for an accelerator. The key here is not performance but dimensions and operating conditions: the machine is designed for shallow cabinets in workshops, stores and telecom nodes, where a regular 2U physically does not fit. The model is not in the Servix catalog — supplied made to order; from the catalog, branch tasks are covered by DL320 Gen11 (41,000,000 UZS) and ML30 Gen11 (31,000,000 UZS).

Jump to: cabinet depth is the main parameter · EPYC 8004: why a separate line · temperature, dust and power · for which tasks · what is available now · questions and answers

Cabinet depth is the main parameter people forget about

A regular 2U rack server is about 75 cm deep. A wall-mounted or floor-standing cabinet in a store's back room, a workshop or a telecom node is most often 45–⁠60 cm. The server does not fit, and this is discovered on site, when the equipment has already been delivered.

DL145 Gen11 is made exactly for this case: the chassis is so much shorter than a regular 2U that it fits into a shallow cabinet together with a switch and a UPS. This is not a marketing detail but the reason the platform was singled out as a separate line in the first place.

A practical tip: before ordering any rack server, measure not only the height in units but also the internal depth of the cabinet from the front to the rear rails, and add 10–⁠15 cm for cables and bend radius. A server that “barely fit” runs with overheated exhaust.

EPYC 8004: why a separate line

Siena is an EPYC designed not for maximum cores but for limited power and cooling. Hence its properties: one socket, six memory channels instead of twelve on the higher-end EPYC, a lower thermal envelope and a lower price.

For the edge, this is the right trade-off. On a site where one and a half to two kilowatts are allocated to the entire cabinet including the air conditioner, a server with a 400-watt processor is unnecessary and harmful: it will bring along enhanced cooling and a second UPS.

If the workload requires maximum cores and memory, DL145 is the wrong class: look at general-purpose single-socket machines such as DL320 Gen11 or at the dual-socket DL380 Gen11 (49,000,000 UZS).

Temperature, dust and power

An edge site differs from a server room not in size but in conditions. Three things decide the fate of a server on site:

  • Temperature. Edge platforms are designed for a wider range than regular rack servers. But an “extended range” does not mean “you can do without air conditioning”: it gives a margin in case the cooling system fails, not a mode for continuous operation.
  • Dust. In a workshop, filters clog in months, not years. A cleaning schedule needs to be built into maintenance right away; otherwise, the power supply will be the first to die.
  • Power. At the edge, voltage fluctuations and outages are more frequent than in an office. A UPS is mandatory, and on an unstaffed site, so is remote power control via iLO, so that a hung node can be rebooted without a site visit.

For which tasks

  • On-site video surveillance. Recording from cameras locally so as not to send the stream to the head office over a narrow link. Archive size calculation and ready-made kits are on the page server for video surveillance.
  • Local branch services. Domain, files, 1C, printing — everything that must keep working when the link to the head office is down.
  • Industrial and telecom nodes. Collecting data from equipment, preprocessing, buffering before sending to the head office.
  • On-site inference. Recognition, video analytics, any models that are cheaper to run locally than to pay for the link — there is a separate article on this.

What is available now

Model

Class

Price

HPE ProLiant DL320 Gen11

single-socket general-purpose 1U

41,000,000 UZS

HPE ProLiant ML30 Gen11

tower for a branch without a rack

31,000,000 UZS

HPE ProLiant DL380 Gen11

dual-socket 2U when you need headroom

49,000,000 UZS

If there is no rack on site at all, depth stops being a problem — and then a tower beats any rack solution. This choice is analyzed in the DL320 Gen11 review.

We will select a platform for a specific cabinet and site conditions — with depth measurement and power and cooling calculations. Write to us.

Questions and answers

What is an edge server and how does it differ from a regular one?

It is a server for a site without a server room: reduced chassis depth, an extended operating temperature range, a focus on low power consumption and remote management. In terms of compute, it is usually more modest than a rack server of the same generation — the task is different.

What processor does DL145 Gen11 have?

A single-socket AMD EPYC 8004 (Siena) — a line with six memory channels and a reduced thermal envelope, designed for the limited power and cooling of edge sites.

Will a regular server fit into a shallow cabinet?

A regular 2U about 75 cm deep does not fit into a 45–⁠60 cm cabinet. Measure the internal depth from the front to the rear rails and add 10–⁠15 cm for cables — this is the only way to avoid discovering the problem on site.

Is DL145 Gen11 available in Tashkent?

The model is not yet in the Servix catalog — supplied made to order; lead time and price are confirmed on request. From the catalog, branch tasks are covered by DL320 Gen11 for 41,000,000 UZS and ML30 Gen11 for 31,000,000 UZS.

Related reading