Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE MSA 2060 and 2062 storage systems in Tashkent: FC, iSCSI, SAS — configurations and prices

Updated

In brief. HPE MSA 2060 and 2062 in Tashkent — from 87,552,000 UZS for an MSA 2062 SAS with 24 bays to 142,546,000 UZS for an MSA 2062 iSCSI with 24 bays (Servix catalog, November 2026); MSA 2060 SAS — price on request. The price difference between items is almost entirely drives, not controllers. The MSA 2060 is a sixth-generation 2U hybrid array: two controllers, 24 GB of cache and system memory per array, eight host ports, up to 395,000 IOPS. The MSA 2062 is the same machine but with two SSDs and an Advanced Data Services license in the box. The MSA 1060 is the entry-level model of the same generation for one or two servers.

Request a storage system calculation for your task → — send us the data volume, the number of hosts and redundancy requirements, and an engineer will put together a configuration with drives and shelves.

Quick links: 2060, 2062 or 1060 · FC, iSCSI or SAS · 12 LFF or 24 SFF · configurations and prices · MSA-DP+ and capacity calculation · tiering, snapshots, ADS · shelves and Gen5/Gen6 compatibility · typical tasks · warranty and lead times

Configurations by line: HPE MSA 2060 · MSA 2062 · MSA 1050; for comparison — Dell PowerVault ME5012 · ME5024.

MSA 2060, 2062 or 1060: what really separates them

All three are 2U dual-controller arrays from the sixth MSA generation. They share electronics and functionality; they differ in configuration and scalability ceiling.

Model

What it is

Scale

When to choose

Catalog price

MSA 2060

hybrid array: SSD, SAS 10k/15k and Midline SAS in any combination

up to 10 enclosures, 240 SFF or 120 LFF drives

the main choice for virtualization and a shared volume for several servers

from 88,277,000 UZS

MSA 2062

the same 2060 plus two included SSDs and an Advanced Data Services license

same

when automated tiering, 512 snapshots and replication are needed right away

from 87,552,000 UZS

MSA 1060

the entry-level model of the generation, same features, fewer ports and shelves

up to 4 enclosures

one or two hosts, branch, small file volume

105,000,000 UZS

MSA 1050 / 2050

previous, fifth generation — discontinued

its own line of shelves and drives

only as a replacement in an installation already in operation

from 69,000,000 UZS

The practical difference between the 2060 and 2062 is the money for the license. Advanced Data Services is purchased separately for the 2060, while the 2062 already includes it along with a pair of SSDs for the performance tier. If automated tiering and replication are needed from day one, the 2062 is cheaper than a 2060 plus license plus SSDs.

FC, iSCSI or SAS: the interface is chosen first

The host connection type is defined by the controller model and changes only together with it. That is why the decision is made before choosing drives, and not by preference but by what is already in the server room. The array has eight host ports — four per controller.

Interface

When it is chosen

Server-side requirements

Catalog example

Price

Fibre Channel 16G

the fabric is already built; latency and isolation of storage traffic are critical

HBA in each server, two FC switches

MSA 2060 FC 12LFF

88,277,000 UZS

iSCSI 10GbE (SFP+)

regular Ethernet network, growth needed without a separate fabric

10G cards and dedicated VLANs or a pair of switches

MSA 2060 iSCSI 24SFF

93,084,000 UZS

SAS 12G

two to four servers in one rack, no switches needed

SAS HBA in each server and cables

MSA 2060 SAS 24SFF

price on request

SAS is the cheapest entry: no fabric, no optics, no port licenses. The limitation is also clear: the number of hosts is limited by the controller ports, and such a connection cannot be stretched between racks. iSCSI at 10G is a compromise for most: the same network as the servers, separate VLANs and sufficient bandwidth for a cluster of three to six hosts. FC is chosen where the fabric already exists and is easier to expand than to introduce a second connection type. The MSA 1060 offers a 10GBASE-T option instead of SFP+ — twisted pair instead of optics, which is noticeably cheaper for a branch.

12 LFF or 24 SFF: capacity versus spindles

The enclosure is chosen based on what the task has more of — terabytes or operations per second.

  • 12 LFF bays (3.5"). Midline SAS 7.2k drives from 6 to 18 TB. Maximum capacity per unit and per cost: archive, file volume, video surveillance, backup target. Raw capacity of one enclosure — up to 216 TB.
  • 24 SFF bays (2.5"). Enterprise SAS 10k at 600 GB–2.4 TB, 15k at 900 GB, SSDs at 960 GB, 1.92 and 3.84 TB. Twice as many spindles per unit and room for all-flash: virtualization, 1C, DBMS. Raw capacity of the enclosure — up to 92.16 TB.

A mixed option also works and is often the most sensible: 24 SFF for production and an LFF shelf for cold data, all managed by the same controllers.

MSA configurations from the catalog with prices

MSA 2060 — hybrid without an ADS license:

MSA 2062 — with two SSDs and Advanced Data Services included:

Entry-level and previous generation: MSA 1060 iSCSI 24SFF — 105,000,000 UZS; from the fifth generation, the catalog has MSA 1050 iSCSI 12LFF — 69,000,000 UZS, MSA 1050 HD-SAS 24SFF — 71,000,000 UZS and MSA 1050 FC 12LFF — 74,500,000 UZS.

Catalog items differ not only in interface but also in the set of drives included — hence the price spread with identical controllers. The manager confirms the exact contents of a specific item in the quote: how many drives, of what capacity and class. The whole section — HPE storage systems in full in the catalog HPE storage systems.

MSA-DP+ instead of RAID 5: how to calculate usable capacity

The sixth generation introduced its own disk group type — MSA-DP+. This is a distributed scheme: each data zone is written as a RAID 6 stripe across segments from ten drives, and spare capacity is spread across the whole group rather than allocated to a dedicated drive.

  • Overhead. Two parity drives for every ten — about 20% of the group's capacity goes to protection.
  • Limits. Minimum 12 drives, maximum 128 drives in one group. HPE recommends MSA-DP+ for HDDs; on SSDs the benefit of fast rebuilds is smaller, and standard levels are more often used there.
  • Classic levels have not gone anywhere. RAID 1, 5, 6 and 10 are supported; the minimum array configuration is two drives in RAID 1. But on drives of 8 TB and larger, RAID 5 is not used: a rebuild takes more than a day, and a second failure in that window kills the group.
  • Calculation example. Twelve 16 TB drives — 192 TB of raw capacity. Minus MSA-DP+ parity — about 153 TB; minus built-in spare capacity and formatting — plan for 135–⁠145 TB and do not fill the array beyond 80%.

A detailed analysis of levels is in the guide RAID 5, 6 or 10 for storage systems, choosing a drive class — in the article drives for servers.

Tiering, snapshots and the Advanced Data Services license

The base firmware supports thin volumes, thin provisioning, reclaiming freed blocks, thin rebuild and 64 snapshots. Everything else is enabled by the ADS license — it is included in the 2062 and purchased separately for the 2060.

  • Automated tiering. Three tiers: Performance on SSD, Standard on Enterprise SAS, Archive on Midline SAS. Data moves between tiers in chunks within a volume; there is no need to place LUNs manually.
  • Snapshots and copies. 64 in the base, 512 with the license, plus Volume Copy. Maximum volumes — 512, hosts — 512, initiators — 1024.
  • Remote Snap replication. Asynchronous snapshot-based replication between 1060, 2060 and 2062 arrays — in the sixth generation with failover and failback to the original site. It is an inexpensive way to get a second site without buying a midrange storage system.
  • SSD read cache. A separate mode: up to two SSDs and 4 TB per pool; with two pools, up to 8 TB of read cache per array. There is no NVMe inside the array; both the tier and the cache use SAS SSDs in regular bays.
  • Pools. Two pools of 1 PB each — one per controller. Volumes are distributed between them, otherwise the second controller sits idle.

Expansion shelves and the Gen5/Gen6 compatibility trap

Up to nine drive shelves can be connected to the MSA 2060 and 2062 via SAS 12G — up to ten enclosures in total, 240 SFF or 120 LFF drives, up to 921.6 TB of raw capacity with SFF and 2.16 PB with LFF. LFF and SFF shelves can be mixed in one array. The MSA 1060 has a lower ceiling — four enclosures.

The main thing people ask about after purchase: shelves and drives of the fifth generation (MSA 1050, 2050, 2052) do not work with the sixth, and vice versa. There is also no in-place upgrade preserving data between generations. That is why the MSA 2050 SAS 12LFF JBOD shelf for 24,800,000 UZS is an expansion for an existing fifth-generation array, not groundwork for a future 2060. If an MSA 1050 is running in the server room and growth is planned, calculate a migration rather than buying more shelves.

Drives — only branded HPE MSA drives in native drive trays: the array checks firmware and model, and a drive from a server or from the open market will at best not join a group.

What tasks MSA is chosen for

  • Virtualization cluster of 3–⁠6 hosts. 2060 or 2062 with 24 SFF, iSCSI 10G, SSDs for the performance tier and SAS 10k for the rest. A shared volume provides live migration and high availability.
  • 1C and DBMS. The same SFF enclosure, but with an emphasis on SSDs: the entire database on the performance tier, archives on Midline in a shelf.
  • Video surveillance and file archive. 12 LFF with 12–⁠18 TB drives, MSA-DP+, SAS connection to a pair of recording servers.
  • Backup target. A separate array on Midline SAS with Remote Snap replication from the production side.

If you have not yet decided whether you need block storage at all, start with the overview SAN, NAS or all-flash. The Dell alternative in the same class is covered in the hub PowerVault ME5: the arrays are close in features, and the choice more often comes down to whose servers are already in the rack.

Warranty, lead times and what to clarify in the quote

  • Warranty. 12 months on all equipment (new, refurbished and used), serviced by Servix.
  • Lead times. Made to order — usually 2–⁠3 weeks, including configurations with the required set of drives; the exact lead time is stated in the invoice.
  • What to ask before payment. How many drives and of what capacity are included in the price; which ADS license version; whether there are enough host ports for the planned number of servers; whether transceivers and cables are needed (they are not included in the array price); who installs and configures.

Installation, splitting into pools, controller failover testing and connection to the hypervisor take a day or two of work; it is better to include this in the contract from the start. Contact us via the contacts pageto get a calculation with drives, shelves and work.

Sources

Other Servix collections

Installation and support — KP Solutions

Installation, setup and maintenance of equipment — from our integrator partner.

kpsolutions.uz