Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

File server and backup server in Tashkent: capacity, drives, RAID and ready-made kits

Updated

In brief. A file server is sized by the data volume three years from now, not today's: take the current volume, multiply by one and a half and add space for shadow copies. A backup server is sized separately and installed separately: volume = full backup × (1 + daily change × number of restore points), so 20 TB of data with 2% daily change and 30 points is 32.0 TB. Drives — enterprise 7,200 rpm in RAID 6; the cheapest terabyte today is on the Ultrastar 22 TB SATA — 294 thousand UZS. Ready-made kits from the catalog: a 16 TB file server is 35.4 million UZS, 64 TB — 68.7 million UZS, a 220 TB backup server — price on request.

Request a file server or backup server calculation → — send us the data volume, number of users and required backup retention depth, and an engineer will calculate the drives and RAID and select a drive cage.

Quick links: how much space you need · drives and price per terabyte · RAID and drive cage · file server: system, permissions, snapshots · backup server · servers from the catalog · ready-made kits

How much space you actually need

A file server fills up not because too little was bought but because it was sized by today's volume. The working formula for three years:

  • Data. Current volume of shared folders × 1.5 — growth in documents, scans and photo archives over three years is rarely less.
  • Shadow copies (snapshots). Plus 15–⁠20% for previous file versions: they are exactly what saves you when a user overwrites a document or ransomware goes through a folder.
  • Headroom against degradation. An array filled beyond 80% slows down on writes and takes longer to rebuild. Usable capacity is divided by 0.8.

Example: 6 TB of shared folders today → 9 TB in three years → 10.8 TB with snapshots → 13.5 TB usable. That is four 8 TB drives in RAID 6 (16 TB usable) with a small margin, or four 10 TB drives (20 TB) with a normal one. Backups are not included in this volume — they live on another machine, more on this below.

Drives: class and price per terabyte

For a file server and backups, 7,200 rpm hard drives are used: a terabyte on them is 5–⁠8 times cheaper than on SSD, and sequential writing and reading of large files is their native job. Price per terabyte from the catalog as of November 2026:

Drive

Class

Price

Per terabyte

WD Red Plus 4 TB

NAS series, SATA

1,868,941 UZS

467 thousand UZS

Ultrastar 7K6 6 TB

enterprise, SAS

2,875,294 UZS

479 thousand UZS

Ultrastar HC320 8 TB

enterprise, SAS

3,234,705 UZS

404 thousand UZS

Ultrastar HC330 10 TB

enterprise, SAS

4,312,941 UZS

431 thousand UZS

WD Red Plus 10 TB

NAS series, SATA

price on request

—

Ultrastar HC550 16 TB

enterprise, SAS

5,031,764 UZS

314 thousand UZS

Ultrastar HC570 22 TB SATA

enterprise, SATA

6,469,411 UZS

294 thousand UZS

Ultrastar HC570 22 TB SAS

enterprise, SAS

8,625,882 UZS

392 thousand UZS

  • Enterprise (Ultrastar). Rated for 550 TB written per year and 2.5 million hours mean time between failures, designed to work in an array of 8–⁠24 drives with vibration from neighboring drives. The standard for a server.
  • NAS series (Red Plus). Rated for 180 TB per year, suitable for an array of up to 8 drives in a small office. On a backup server that writes tens of terabytes every night, the annual limit is used up within months.
  • SAS or SATA. For a single server there is no difference in speed; SAS is needed for dual-port connection in storage systems and disk shelves, and SATA is 20–⁠30% cheaper — HC570 22 TB SATA versus the same model in SAS.
  • The larger the drive, the cheaper the terabyte, but the longer the rebuild. Rebuilding 22 TB takes more than a day, so only RAID 6 is used on drives of 8 TB and up.

A full review of drive classes, SSDs for cache and controllers is in the selection drives and RAID controllers.

RAID and drive cage

  • RAID 6 is the standard for file data on large drives: the array survives the failure of two drives, and a second failure during the rebuild of the first does not destroy the data. Usable capacity is (N − 2) × capacity: 4 × 8 TB gives 16 TB, 8 × 16 TB gives 96 TB, 12 × 22 TB gives 220 TB.
  • RAID 5 is not used on drives of 8 TB and up: the probability of a read error during a day-long rebuild becomes significant. RAID 10 is excessive for files — you pay half the drives for random write speed that a file server does not need.
  • A controller with cache and battery is mandatory: without it, RAID 6 write performance drops several-fold. PERC H755 — 8,625,882 UZS, HPE Smart Array P408i-a — 7,188,235 UZS; for drive cages with 12 or more drives — P816i-a with 16 lanes, price on request.
  • An LFF drive cage for 3.5-inch drives — only it gives 16–⁠22 TB per bay. Four bays — up to 44 TB usable with 22-terabyte drives, eight — up to 132 TB, twelve — up to 220 TB. The backplane type is fixed when ordering the chassis, so the number of bays is planned for growth.
  • The system goes on a separate device: Dell BOSS (7,907,058 UZS) or HPE NS204i-p (10,063,529 UZS), so as not to waste drive cage bays or mix the OS with data.

The exact usable capacity and rebuild time for your set of drives are calculated by the RAID calculator; choosing the level is covered in the guide RAID 5, 6 or 10.

File server: system, permissions and snapshots

  • Windows Server is the standard for an office on Active Directory: folder permissions through domain groups, per-user quotas, scheduled shadow copies (VSS) with restoring a previous version right from Explorer, DFS for multiple sites. A Standard license for 16 cores plus client CALs — these are counted separately.
  • Linux with Samba covers the same tasks without licenses: domain integration, ACL permissions, ZFS or LVM snapshots. It requires an administrator with Linux experience; on ZFS the server checks data integrity itself and catches “silent” drive errors.
  • Off-the-shelf NAS vs server. A desktop NAS wins up to 4–⁠6 drives and about ten users. A server is the choice when there are 30 or more users and you need a domain, policy-based shadow copies, a second power supply and a warranty on the whole platform rather than on a box.
  • Network. A gigabit port delivers 110 MB/s — one user copies a 50 GB folder in eight minutes and takes up the entire link. From 30 users, 10G to the switch is installed: Intel X520-DA2 or HPE 530SFP+ at 4,097,294 UZS each and a DAC SFP+ cable for 249,000 UZS.
  • Memory. 16–⁠32 GB is enough for a file server; ZFS asks for 1 GB per terabyte of data for the metadata cache, that is, 64 GB for a 40–⁠60 TB array.

Backup server: size and install it separately

Backups on the same server where the data lives are not backups but a second folder: a controller failure, ransomware or an administrator error takes both. The 3-2-1 rule: three copies of the data, on two different media, one off-site.

How much space for backups

Backup storage volume = full backup × (1 + daily change × number of retained points). Change is measured from actual data: 1–⁠3% per day for office data, 5–⁠10% for databases and 1C.

Data

Daily change

Restore points

Needed for backups

With 25% headroom

5 TB

2 %

30 days

8.0 TB

10.0 TB

20 TB

2 %

30 days

32.0 TB

40.0 TB

50 TB

3 %

60 days

140.0 TB

175.0 TB

Deduplication and compression in Veeam and Proxmox Backup Server reduce these figures 2–⁠4 times on office data, but volume should be planned without counting on them: already-compressed scans and video hardly compress again.

What sets a backup server apart from a file server

  • It is not in the domain and is not visible to users. Ransomware that has obtained domain administrator rights must not reach the backups. A Linux repository with deletion locked for the retention period (immutable) — this is how Veeam Hardened Repository and Proxmox Backup Server work.
  • More drives and a bigger cage, a more modest processor. The task is to take in tens of terabytes of sequential writes overnight: 12 LFF bays, RAID 6, a 10G port. Two entry-level processors and 32–⁠64 GB of memory are enough; Proxmox Backup Server deduplication likes memory — count 1 GB per terabyte.
  • A second copy off-site. A disk shelf at a partner's site or in another building, connected to the backup server: Dell PowerVault MD1400 for 12 drives — 33,000,000 UZS, HPE MSA 2060 SAS 12LFF — price on request; for hundreds of terabytes — ME484 JBOD for 84 drives for 175,000,000 UZS. Drives for the shelves are priced separately, using the same table.
  • Software. Veeam Backup & Replication is licensed by subscription per number of protected machines; Proxmox Backup Server is free, only support is paid; Windows Server Backup is included in the OS and covers one server without policy-based scheduling. Licenses are not included in the kits below.
  • Restore testing. Once a quarter, one virtual machine and one folder are restored to another server and the time is measured. A backup that nobody has restored is an assumption, not protection.

Servers from the catalog for files and backups

4 LFF bays, up to 44 TB usable — an office of 20–⁠50 people: HPE ML30 Gen10 — 9,571,000 UZS, Dell T150 — 13,808,000 UZS and T150 with 16 GB — 14,329,000 UZS. Towers for an office without a server room.

8 LFF bays, up to 132 TB — an office of 50–⁠150 people or a backup server for a small company: Dell T350 8LFF — 25,799,000 UZS, T350 with Xeon E-2334 — price on request, HPE DL180 Gen10 8LFF — 24,251,000 UZS, Dell R740 8LFF — 25,433,000 UZS.

12 LFF bays, up to 220 TB — a backup server or file archive: HPE DL380 Gen10 12LFF — 36,037,000 UZS, HPE DL180 Gen10 12LFF — 37,563,000 UZS, Dell R750XS 12LFF — 49,653,000 UZS and R750XS with 64 GB — 55,284,000 UZS. A shelf for 12 or 84 drives can be added to any of them when the archive outgrows the drive cage.

If the files are needed by dozens of virtual machines rather than users, the task becomes a storage system — see the selections HPE MSA and PowerVault ME5.

Ready-made kits with prices

The amounts do not include OS and backup software licenses, a UPS or a switch. UPS sizing by power consumption — UPS calculator; if the same drives are needed for a video archive — video surveillance server, which has its own arithmetic.

What to clarify before ordering

  • The current volume of shared folders and last year's growth — the drive cage for three years is sized from these.
  • Number of users and domain: these determine the OS, CALs and whether 10G is needed.
  • What is being backed up (files, virtual machines, 1C databases) and how many restore points to keep.
  • Where the second copy will be: another building, a partner, the cloud — a shelf or a second server is sized for it.
  • Whether you already have backup software and licenses for it.

Send us the figures — we will calculate the drives, drive cage and shelf for growth and send a quote including VAT: contacts. Drives are in the section SSD and HDD, platforms are in the section Servers.

Other Servix collections

Sources

Installation and support — KP Solutions

Installation, setup and maintenance of equipment — from our integrator partner.

kpsolutions.uz