Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

Server for 1C in Tashkent: configurations for 5, 10, 20, 30, 50 and 100 users

Updated

In brief. A server for 1C in Tashkent costs from 9.6 million UZS for five users of a file database to 66 million UZS for a hundred users in client-server mode (Servix catalog prices, November 2026). For 1C, core frequency matters more than core count: take a processor with a base frequency of 3.0 GHz or higher, keep the database on SSDs in RAID 1 or RAID 10, and calculate memory at 2–⁠3 GB per active user plus headroom for the DBMS. Below are six configurations with models, prices and an explanation of why they are built this way.

Select a configuration in the server catalog → — models with prices and ready-made builds; an engineer will do the calculation for 1C and your number of users.

Quick links: 5 users · 10 · 20 · 30 — office with 30 computers · 50 · 100 and more · warranty and lead times · questions and answers

What 1C speed depends on

“We need a server for 1C” is not yet a configuration: “Accounting” for five workstations and an ERP for one hundred twenty users are different machines and different budgets. You need to calculate by four parameters, and the number of users is not the main one.

  • Core frequency. Posting documents, month-end closing and reports in 1C are single-threaded operations limited by frequency. A Xeon E-2334 with a 3.4 GHz base frequency on four cores serves accounting faster than a Xeon Silver 4310 with twelve cores at 2.1 GHz. Cores provide parallel sessions; frequency provides the speed of each of them.
  • Database mode. Up to 10–⁠15 active users, a file database runs from a shared folder. Beyond that, locks increase and the database is moved to client-server mode — PostgreSQL or MS SQL Server on the same or a separate server. This transition changes memory and drive requirements more than adding another ten users.
  • Drives. Transaction logs and temporary files produce random writes in small blocks. No amount of memory will save a SATA HDD 7200 here: only SSD, and from 50 users — NVMe. Two drives — RAID 1, four or more — RAID 10. We do not use RAID 5 under a 1C database: the write penalty eats up the capacity gain.
  • Memory. The guideline is 2–⁠3 GB per active user plus the DBMS working set. If terminal access (RDS) runs on the same server, add 1.5–⁠2 GB per session.

Matrix: server for 1C by number of users

Users

Database mode

Processor

Memory

Drives

Catalog example

Price from

5

file

4 cores from 3.0 GHz

16 GB

2×SSD, RAID 1

HPE ML30 Gen10

9,571,000 UZS

10

file or client-server

4 cores from 3.1 GHz

16–⁠32 GB

2×SSD, RAID 1

Dell T150 (E-2324G)

14,329,000 UZS

20

client-server

4 cores / 8 threads from 3.4 GHz

32 GB

2–⁠4×SSD, RAID 1/10

Dell T150 (E-2334, 32 GB)

17,012,000 UZS

30

client-server

4–⁠8 cores from 3.2 GHz

64 GB

4×SSD, RAID 10

Dell R350 8SFF (E-2334)

price on request

50

client-server + RDS

8–⁠16 cores from 3.2 GHz

128 GB

SSD/NVMe RAID 10, 10GbE

HPE DL380 Gen10 (2×Silver 4215R)

45,761,000 UZS

100

client-server + RDS, 2 sockets

16–⁠24 cores

256 GB

NVMe RAID 10, 10GbE

Dell R750 16SFF (2×Silver 4310)

66,230,000 UZS

Prices are from catalog product pages as of November 2026 in the base configuration: memory and drives are added for your task, and the manager calculates the final amount taking into account the exchange rate, availability and lead times.

Server for 1C for 5 users

Five workstations of “Accounting” or “Trade Management” mean a file database of 5–⁠20 GB. One processor with four fast cores, 16 GB of memory and two mirrored SSDs are enough. A tower server fits in the office without a rack and is quiet; if you have a rack, see rack servers.

What not to save on: a RAID controller with cache and a second drive. A single SSD without a mirror means the 1C database on one device; restoring from yesterday's backup will cost a day of accounting work.

Server for 1C for 10 users

Ten users is the threshold beyond which a file database starts hitting locks. If you plan to grow, take a machine that can later run PostgreSQL: 32 GB of memory and four drive bays.

Server for 1C for 20 users

With twenty active users, file mode already gets in the way: while one document is being posted, the others wait. Move the database to client-server mode — and calculate memory for the DBMS: 32 GB, of which 8–⁠12 GB go to PostgreSQL.

Server for 1C for 30 users and for an office with 30 computers

Thirty users is a typical office with 30 computers, where one machine hosts 1C, a file share, a domain controller and sometimes email. Here you already need client-server mode, 64 GB of memory and RAID 10 of four SSDs: one drive group serves both the database and the logs.

Splitting roles across two servers at this scale is usually premature: one server with headroom and an honest backup scheme is cheaper.

Server for 1C for 50 users

Fifty users already means two roles: the 1C application server and the DBMS. They are either split across two machines or kept on one dual-processor server with 128 GB of memory. Drives — SSD or NVMe in RAID 10, network — 10GbE to workstations and to the storage system, if the database is stored outside the server.

Server for 1C for 100 users and more

One hundred users in client-server 1C with terminal access means 16–⁠24 cores, 256 GB of memory and NVMe in RAID 10. In practice, the application server and the DBMS are split, a second machine is added for RDS, and the database and backups are kept on a storage system with replication.

At this scale, the configuration is calculated not by the number of users but by the load profile: the number of databases, the size of the largest one, the number of background jobs and scheduled operations. Send us these figures and we will put together a specification.

Renting or buying a server for 1C

Renting a server in Uzbekistan makes sense in three cases: a pilot for a few months, seasonal load, and launching a branch where infrastructure has not yet been built. In other cases, buying pays off over a two-to-three-year horizon — the rental payment for a 1U server is comparable to the depreciation of your own, but leaves no asset and gives no control over where the database is physically stored.

An intermediate option if the budget is limited is a refurbished server of the previous generation: the same Gen10 or R650 platform costs noticeably less than a new one.

Warranty, lead times and what is included in the delivery

Servix engineers calculate the configuration for your 1C profile free of charge: processors, memory, drive subsystem, RAID controller and networking, with a compatibility check against your existing equipment. Warranty — 12 months on all equipment (new, refurbished and used), serviced by Servix. We work by bank transfer with VAT, prepare specifications and quotes for tenders, and deliver across Uzbekistan. Components for expansion are in the section Components, ready-made machines are in the catalog Servers.

Questions and answers

How much does a server for 1C cost in Tashkent?

From 9,571,000 UZS for a tower server for a file database for five users to 66,230,000 UZS for a dual-processor 2U for one hundred users (Servix catalog, November 2026). A typical office of 20–⁠30 people fits within 17–⁠25 million UZS.

How much memory does a 1C server need?

2–⁠3 GB per active user plus the DBMS working set: 16 GB for five users, 32 GB for twenty, 64 GB for thirty, 128 GB for fifty. With terminal access, add 1.5–⁠2 GB per session.

Which processor is better for 1C — many-core or high-frequency?

High-frequency. Key 1C operations are single-threaded, so a Xeon E-2334 (4 cores, 3.4 GHz) serves accounting faster than a Xeon Silver 4310 (12 cores, 2.1 GHz). Many cores are needed when there are more than fifty users or the server also hosts virtual machines.

Can 1C be installed on a regular computer?

For five users of a file database — technically yes, but without ECC memory, RAID and remote management, any memory error or drive failure stops accounting. The price difference with a server platform is about 5 million UZS; the cost of downtime is usually higher.

Server for 1C for 30 computers — how much money is that?

A server such as the Dell R350 with 64 GB of memory and four SSDs in RAID 10 — price on request. Plus 1C and DBMS licenses — they are calculated separately and are not included in the equipment price.

How soon can you deliver?

Made to order — usually 2–⁠3 weeks. The manager states the exact lead time together with the price.


A detailed breakdown with the calculation method is in the guide Server for 1C: how to choose a configuration for your number of users; what makes up the price of a server in Tashkent — here.

Sources

Other Servix collections

Installation and support — KP Solutions

Installation, setup and maintenance of equipment — from our integrator partner.

kpsolutions.uz