Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant Gen10

HPE ProLiant ML30 GEN10 4LFF Server (1×Xeon E-2124, 8GB)

Tower 4U (convertible to rack) · 4 DDR4 UDIMM ECC slots, up to 2666 MT/s, up to 64 GB

Refurbished · Ready-made configurations from 9,571,000 UZS · platform built to your specification from 22,000,000 UZS

HPE ML30 GEN10 4LFF Server (1×Xeon E-2124, 8GB)

At a glance.

Tower

Chassistower

1 socket

ProcessorsIntel Xeon E-2100/E-2200 (up to 6 cores)

64 GB

Memory, maxDDR4, 4 slots

up to 4 LFF

Drive bays

1 GbE

Networking

iLO 5

Management

About the model.

In brief. HPE ProLiant ML30 Gen10 in the 4LFF configuration is a refurbished single-socket entry-level tower server with an Intel Xeon E-2124 processor and 8 GB of DDR4 memory. No drives are installed; they are selected for the task. Suitable for an office or branch without a server room: 1C, file storage, domain controller.

What is in this configuration

  • Form factor: tower, 175 × 475 × 368 mm, 10.1 kg
  • Processor: 1 × Intel Xeon E-2124 — 4 cores, 4 threads, 3.30 GHz, 8 MB cache
  • Memory: 8 GB DDR4 UDIMM 2400 MHz, 3 of 4 slots free, maximum 64 GB
  • Drives: not installed, 4 3.5″ (LFF) bays
  • RAID controller: HPE Smart Array S100i SR Gen10 (software RAID)
  • Networking: 2 1 Gbps RJ-45 ports, embedded (361i)
  • Management: iLO 5 Standard, Intelligent Provisioning
  • Power: 1 × HP 350 W, non-redundant
  • Condition: refurbished

This is a basic platform for a company that needs one server in a regular office space: accounting system, shared folders, directory service. Remote management via iLO 5 lets the administrator restart the server and check its status without going on site.

When expanding, keep the platform's limitations in mind. Memory is DDR4 UDIMM ECC only, four slots, up to 64 GB; the platform supports speeds up to 2666 MT/s, and the installed module runs at 2400 MHz. Drives: up to four 3.5″ LFF, with hot-plug or non-hot-plug bays. The standard S100i is software RAID; if hardware RAID is needed, the platform supports HPE Smart Array E208i-p and P408i-a controllers. Processors in the line are Intel Xeon E-2100/E-2200 up to 6 cores, as well as Pentium and Core i3.

There is one power supply, HP 350 W, non-hot-plug: a second one cannot be added to it. Power redundancy is possible only by replacing it with two Flex Slot 500 W power supplies. The chassis converts to rack, but rails are not included in this configuration.

Warranty — 12 months, service is provided by Servix. Delivery within Tashkent is free, to the regions by arrangement. Unopened goods can be returned within 10 days at the office. Made to order — 2–⁠3 weeks, the price is fixed in the invoice, prices include 12% VAT. For a quote, send to [email protected] the server's task, the required memory, the number and type of drives, RAID and power requirements, and your company details.

Questions and answers

Is this a new server?

No, the server is refurbished. Warranty — 12 months, serviced by Servix.

How much memory can be installed?

Up to 64 GB DDR4 UDIMM ECC in four slots. Currently one slot is occupied by an 8 GB module, three are free.

Is redundant power possible?

A second unit cannot be added to the current 350 W power supply. Redundancy is possible only by replacing it with two Flex Slot 500 W power supplies.

Is a separate RAID controller needed?

The standard S100i works as software RAID. For hardware RAID, the platform supports HPE Smart Array E208i-p or P408i-a — this is discussed during configuration selection.

Specifications

Chassis

Form factor
Tower 4U (convertible to rack)
Weight
10.1 kg
Dimensions (W x D x H)
175 x 475 x 368
Rack rails
No
Form factor
Tower

Processors

Processors
1x Intel Xeon E-2100/E-2200 (up to 6 cores), or Pentium/Core i3
Sockets
1
Processor
1x Intel Xeon E-2124 (4C 8M Cache 3.30 GHz)

Memory

Memory
4 DDR4 UDIMM ECC slots, up to 2666 MT/s, up to 64 GB
RAM
8GB 8GB DDR4 UDIMM 2400MHz (supports up to 64GB maximum, 4 DIMM slots)

Storage

Drive bays
4x 3.5" (LFF), hot-plug or non-hot-plug
Controllers
HPE Smart Array S100i / E208i-p / P408i-a
Drives
noHDD (up to 4 HDD 3.5'' LFF)
RAID controller
HPE Smart Array S100i SR Gen10 (SW RAID)

Networking and power

Networking
2x 1GbE (361i)
Power supply
1x HP 350W
Network adapter
2 port 1Gb/s RJ-45 (Integrated)

Management

Management
HPE iLO 5, Intelligent Provisioning
Remote management
iLO 5 Standard

Other

Condition
Refurbished

Configurations.

A platform built to your specification or 1 ready-made build. All HPE ProLiant ML30 Gen10 configurations →

Platform

from 22,000,000 UZSbuilt to your specification

Select

4 LFF

9,571,000 UZSrefurbished

Select
What is inside
built to your specification1x Intel Xeon E-2124 · 8GB 8GB DDR4 UDIMM 2400MHz · HPE Smart Array S100i SR Gen10 · 1x HP 350W · 2 port 1Gb/s RJ-45
Availability
Available to order, 2–3 weeks, Ships by December 6Available to order, 2–3 weeks, Ships by December 6
HPE ML30 GEN10 4LFF Server (1×Xeon E-2124, 8GB)

Available to order, 2–3 weeks, Ships by December 6

Buy HPE ML30 GEN10 4LFF Server (1×Xeon E-2124, 8GB)

Variant. Platform or ready-made build.

Condition: refurbished.

9,571,000 UZS

HPE ML30 GEN10 4LFF Server (1×Xeon E-2124, 8GB) · refurbished · invoice with 12% VAT

Installation and support — KP Solutions

Installation, setup and maintenance of equipment — from our integrator partner.

kpsolutions.uz

Other models in the lineup.

Refurbished · Gen10 · Tower · 2 sockets

ML350 Gen10

HPE ProLiant

from 34,912,000 UZS3 configurations · all refurbished

9,571,000 UZS
Available to order, 2–3 weeks
Buy