Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

Transceivers in Tashkent

SFP, SFP+, SFP28, QSFP+ and QSFP28 optical modules and DAC cables in Tashkent: prices, distances from 300 m to 120 km, selection for your switch model.

78 products found

Products

Available to order, 2–3 weeks

1m DAC Cable

HPE

10 Gbps · SFP+ / SFP+

Price on request
Details ›

Available to order, 2–3 weeks

5m DAC Cable

HPE

10 Gbps · SFP+ / SFP+

Price on request
Details ›

Optical modules and direct attach cables for switches and servers: SFP at 1 Gbps, SFP+ at 10, SFP28 at 25, QSFP+ at 40 and QSFP28 at 100 gigabits. The catalog includes optics for distances from 300 meters over multimode to 120 kilometers over a single fiber, 1–⁠5 meter copper DAC cables and modules with an RJ45 port. The section has 67 items, prices from 170,600 UZS.

Fibreon modules and cables are compatible equivalents of Cisco, HPE, Dell, Huawei, Juniper and MikroTik originals: the original part number is listed on the product page and can be found by searching the catalog. We program the module for your platform.

What is in the catalog

  • SFP 1G — SX for 550 m, LX for 20 km, ZX for 40–⁠80 km and single-fiber WDM for 3–⁠120 km.
  • SFP+ 10G — SR for 300 m, LR for 2–⁠20 km, ER for 40 km, single-fiber WDM for 10–⁠40 km, DAC for 1–⁠5 m and a module with an RJ45 port.
  • SFP28 25G — SR for 100 m, LR for 10–⁠20 km, WDM for 20 km and DAC for 1–⁠5 m.
  • QSFP+ 40G — SR4 over MPO, LR4 for 10–⁠20 km, DAC for 1–⁠3 m and a 4 × SFP+ breakout cable.
  • QSFP28 100G — SR4 over MPO, LR4 for 10–⁠20 km, single-fiber BiDi for 20 km and DAC for 1–⁠3 m.
  • FC 32Gb — dual-port 32 Gbps Fibre Channel adapters for connecting servers to a SAN.

How to choose

The order is simple. First the speed — it is set by the switch port and the card in the server. Then the distance: within a rack, a DAC cable is cheaper and more reliable; up to 300 meters over multimode, SR modules are enough; beyond that you need single-mode fiber and LR or ER modules. If only one free fiber is available, single-fiber WDM modules are used — but always as a pair, with opposite wavelengths. Only at the end is the connector chosen: LC Duplex for most modules, LC Simplex for single-fiber ones, MPO for SR4 at 40 and 100 gigabits.

Compatibility

Switches from many vendors read the coding in the module's EEPROM and may refuse to bring up a link with a third-party transceiver. Before ordering, tell us the switch or server model — we will select a module with the right firmware. What works with what and why a link does not come up is covered in the guide network cards and transceivers, and network cards with prices are collected in the selection network cards, transceivers and DAC.

Questions and answers

Can an SFP28 module be installed in an SFP+ port?

Physically yes, the connector is the same. The link will come up at 10 gigabits if the port allows it. The reverse — an SFP+ module in an SFP28 port — also works and gives the same 10 gigabits.

Why is DAC better than a pair of modules?

It is cheaper, does not require connector cleaning and does not heat up. The downside is the fixed length and the weight of the cable: within a rack it is the right choice; between floors you need optics.

Do the modules need to be the same brand as the switch?

Not necessarily, but you do need to order coding for the specific vendor. We program modules for the equipment model you specify.

Fibreon — our brand of optical modules

Compatible SFP, SFP+, SFP28, QSFP28 and QSFP-DD modules up to 400G: equivalents of original Cisco, Huawei, HPE, MikroTik and other part numbers, selection by distance and fiber type, one-year warranty in Tashkent.

Go to fibreon.uz (in Russian)