At a glance.
Connectors
Speed
Length
Hot swap
About the model.
In brief. The HP 5m DAC Cable is a passive copper Twinax cable with SFP+ connectors on both ends, rated for 10 Gbps at a length of 5 m. It is suitable for connecting servers, storage systems and switches in adjacent racks of the same row, where a short cable is no longer enough.
What is in this configuration
- Type: passive copper DAC (Twinax)
- Connectors: SFP+ / SFP+
- Speed: 10 Gbps
- Length: 5 m
- Hot swap: yes
- Brand: HP
- Package weight: 1.12 kg
- Package dimensions: 53.97 x 62.75 x 13.02 cm
Typical scenarios: a server and an aggregation switch across a rack, a storage system in one rack and hosts in another, a link between two ToR switches. Five meters is enough to run along the overhead tray or through the side organizers of two racks, leaving slack for neat routing.
5 m is the practical limit for a passive 10 Gbps DAC: due to attenuation in copper, the signal cannot travel further without amplification. For links between rows or to another room, you need an active DAC, AOC or a pair of SFP+ SR modules with an optical patch cord.
The cable is thicker and heavier than shorter versions — keep this in mind when routing it in trays and organizers. The latched SFP+ connectors support hot swap. If the switch checks transceiver coding, confirm compatibility before ordering.
The cable is new, made to order with a lead time of 2–3 weeks; the price is fixed in the invoice and includes 12% VAT. Warranty — 12 months, serviced by Servix. Delivery within Tashkent is free; to the regions, by arrangement. Unopened items can be returned at the office within 10 days. For a quote, send to [email protected] the required number of cables, the switch and network adapter models you plan to use them with, and your company details for the invoice.
Questions and answers
Is 5 m enough to connect between rack rows?
No. 5 m is the practical limit for a passive 10 Gbps DAC. For links between rows or to another room, you need an active DAC, AOC or SFP+ SR modules with an optical patch cord.
Can the cable be connected without powering off the equipment?
Yes, the SFP+ connectors support hot swap.
Will the cable work with my switch?
This is an HP cable with SFP+ / SFP+ connectors. If your switch checks transceiver coding, email us its model before ordering to confirm compatibility.
Is the cable new, and what is the warranty?
Yes, the cable is new. Warranty — 12 months, serviced by Servix.
Specifications
Chassis
- Package weight
- 1.12 kg
- Package dimensions
- 53.97 x 62.75 x 13.02 cm
Networking and power
- Speed
- 10 Gbps
Other
- Type
- passive copper DAC (Twinax)
- Connectors
- SFP+ / SFP+
- Length
- 5 m
- Hot swap
- yes
- Brand
- HP

Available to order, 2–3 weeks, Ships by December 7
Buy 5m DAC Cable
Condition: new.
We will code it for your hardware — free of charge
We will write the compatibility code for Cisco, HPE Aruba, Huawei, Juniper, Dell, MikroTik and other platforms into the module — your switch will recognize it as supported. Specify your equipment model in the order comment.
Installation and support — KP Solutions
Installation, setup and maintenance of equipment — from our integrator partner.
Similar products
Available to order, 2–3 weeks
HPE FlexNetwork X240 10G SFP+ to SFP+ DAC
HPE
passive copper DAC, SFP+ / SFP+ · 1.0625–10.52 Gbps (10GbE) · 5 m
Available to order, 2–3 weeks


