Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant Gen10

HPE ProLiant ML350 Gen10 8SFF — configurations and prices

34,912,000 UZS · 3 configurations

HPE ML350 Gen10 8SFF Server (1×Xeon Silver 4208, 16GB)

At a glance.

Tower

Chassistower

2 sockets

Processors1st/2nd Gen Intel Xeon Scalable

3 TB

Memory, maximumDDR4, 24 slots

up to 8 SFF

Drive bays

iLO 5

Remote management

About the ML350 Gen10

HPE ProLiant ML350 Gen10 is a dual-socket tower server by HPE (Gen10). Remote management: iLO 5.

Servix offers 3 ML350 Gen10 configurations. Price: 34,912,000 UZS; all refurbished. Made to order in 2–⁠3 weeks; price and lead time are confirmed in an invoice with 12 % VAT.

More models in HPE ProLiant servers; by use case: Server for 1C, Virtualization server.

Inside the ready-made configurations

Ready-made ML350 Gen10 builds differ in processors, memory capacity, RAID controller and drive cage.

  • Processors: 1× Xeon Silver 4208, 2× Xeon Silver 4210R (8–⁠10 cores per processor).
  • RAM: 16 GB to 32 GB, DDR4 RDIMM.
  • Drive cage: 8 SFF — 3 builds.
  • Drives: none in the ready-made builds (noHDD); the bays are free for your drives.
  • RAID controller: HPE P408i, HP P408i-a.
  • Power supplies: 1× 500 W, 1× 800 W.
  • Networking: 4 port 1Gb/s RJ-45.

ML350 Gen10 specifications

Form factor
4U tower (converts to rack)
Processors
Up to 2x 1st/2nd Gen Intel Xeon Scalable (4-28 cores)
Sockets
2
Memory
24x DDR4 HPE SmartMemory, up to 3 TB
Drive bays
8x SFF (2.5") SAS/SATA hot-plug, expandable with cages
Networking
4x 1GbE, optional 10/25GbE PCIe adapters
Management
HPE iLO 5

ML350 Gen10 configurations and prices

3 configurations, by price. Click a configuration for its specifications and cart. All items are made to order, 2–⁠3 weeks.

ConfigurationProcessorMemoryRAIDConditionPrice
8 SFF1× Xeon Silver 420816 GB DDR4HPE P408iRefurbished34,912,000 UZS
8 SFF2× Xeon Silver 4210R32 GB DDR4HP P408i-aRefurbishedOn request
8 SFF2× Xeon Silver 4210R16 GB DDR4HPE P408iRefurbishedOn request

Choosing your ML350 Gen10 configuration

All builds have SFF (2.5″) bays for SSDs and SAS drives, suited to databases and virtualization.

Ready-made builds have 16 GB to 32 GB of memory; the platform takes up to 3 TB, so memory can be added later.

All configurations are refurbished. Condition is shown in the table and product pages; warranty: 12 months, serviced by Servix.

Need another configuration? Click “Request a quote”: we will match processors, memory and drives to your workload and send a proposal.

ML350 Gen10 and related models

Differences based on catalog data:

How to order

Order from the table via the cart or click “Request a quote”: a manager confirms the configuration, price and lead time.

Payment by bank transfer, invoice with 12 % VAT. Free delivery in Tashkent; other regions of Uzbekistan are billed by address and weight as a separate invoice line. Installation and support: integration partner KP Solutions.

HPE ProLiant ML350 Gen10 overview: what workloads it suits and how to choose a configuration

The ML350 Gen10 is a dual-processor server in a tower chassis. It stands on the floor in an office or utility room, and when the company grows into a rack cabinet, it moves into the rack. Its processors, memory and iLO 5 are the same as in HPE Gen10 rack models, but there is more room inside: up to 24 drives, 8 PCIe slots and bays for a tape drive.

Who the ML350 tower suits

  • An office without a server cabinet. One server for everything: 1C, shared folders, mail, a few virtual machines on Hyper-V or Proxmox.
  • Files and backups. Up to 12 3.5″ drives and two half-height bays for an RDX or LTO tape drive: backups go to removable media without a separate device.
  • A branch office without its own administrator. iLO 5 provides network management, and the front panel locks with a key.
  • Video archive. Many HDDs in one chassis and free slots for additional controllers.

Noise. According to QuickSpecs, typical ML350 Gen10 configurations produce 27–⁠32 dBA at the bystander position at 23 °C; for comparison, the rack-mounted DL360 Gen10 produces 35–⁠45 dBA. The exception is NVMe: under load, the fans raise the noise to 50–⁠55 dBA, and HPE explicitly advises taking this into account when choosing a location.

Temperature. The standard inlet range is 10 to 35 °C, but already above 30 °C performance may decrease. In a closed utility room without air conditioning, this threshold is easy to exceed in summer — the room requirements are collected in the office server room checklist.

Where the ML350 is overkill: files and 1C for a small team without virtualization — a single-processor tower is enough. Where it falls short: you need PCIe 4.0, fast NVMe arrays or DDR4-3200 memory — that is already the next generation.

The platform according to QuickSpecs: what is not visible in the table

Processors and fans. Up to two 2nd Gen Xeon Scalable processors (the server also works with 1st Gen), up to 28 cores and 205 W per processor. Single-processor models come with two non-hot-swap fans, dual-processor models with six and N+1 redundancy. The 874572-B21 redundant fan kit is mandatory with 24 SFF, 12 LFF, an NVMe cage and fully populated drive boxes.

Memory. 12 slots and 6 channels per processor. With RDIMM the maximum is 1.5 TB, with LRDIMM — 3 TB; the types cannot be mixed. In builds on the Silver 4208 and 4210R, memory frequency is limited to 2400 MT/s, whatever figure the module label shows.

Drives. There are three boxes at the front. In the base build one is occupied — 8 SFF or 4 LFF; 8 SFF or 4 LFF cages are added to the other two, for a total of up to 24 SFF or 12 LFF. Cages can be mixed, for example 4 LFF + 8 SFF + 4 LFF. NVMe drives are installed only through the Express Bay cage in the second box, up to 8 drives, and Smart Array controllers do not work with them.

Controllers. The S100i on the system board builds RAID 0, 1, 5 and 10 in software, only from SATA drives and only under Windows; Linux and VMware use the built-in ports in AHCI mode. Hardware controllers — E208i, P408i in modular (-a) or PCIe (-p) form, P816i-a and P824i-p. The P series needs a Smart Storage Battery (P01367-B21) or a hybrid capacitor — according to QuickSpecs, they are sold separately.

Slots and networking. Eight full-height, full-length PCIe 3.0 slots: 1–⁠4 are available with one processor, 5–⁠8 only with a second. Double-width accelerators fit in slots 1, 3, 5 and 7, up to four of them. Built-in networking — 4 × 1 Gbps; the ML350 has no FlexibleLOM slot, so 10/25 Gbps requires a separate PCIe card. The built-in adapter does not support 100 and 10 Mbps: an old 100 Mbps switch will have to be replaced.

Power. Hot-swap Flex Slot power supplies: 500 and 800 W Platinum, 800 W Titanium, 1600 W Platinum; two different units cannot be installed together. In some ready-made models, HPE installed one non-redundant 500 W power supply without hot swap — a second one can be added to it only via the 874571-B21 RPS kit.

Management and security. iLO 5 — a dedicated 1 Gbps port at the rear and a service port at the front; Standard is built in, Advanced is a separate license. A lockable front panel, a padlock eye and a Kensington slot are standard. Through the VGA and DisplayPort outputs, two monitors can be connected in mirror mode without a graphics card.

Rack installation

The ML350 Gen10 can be converted to rack mounting with the 874578-B21 Tower-to-Rack kit: a 1U sliding shelf with a cable management arm. Lying on its side, the server occupies 4U, together with the shelf — 5U. Shelf depth is 69.2 cm, with the cable arm — 83.5 cm: check it against the cabinet depth. In tower form the chassis is 46.25 × 17.4 × 64.8 cm (height × width × depth), weight — from 21 to 42 kg, so it is mounted by two people.

If you already have a rack and there will be several servers, it makes more sense to take a rack model right away — choosing the form factor is covered in the article "Rack or tower server".

ML350 Gen10 and Dell towers

The site has three Dell tower lines of a neighboring class. The figures are from the Dell Technical Guide and HPE QuickSpecs.

Parameter

HPE ML350 Gen10

Dell T350

Dell T440

Dell T550

Processors

2 × 1st/2nd Gen Xeon Scalable, up to 28 cores

1 × Xeon E-2300, up to 8 cores

2 × 1st/2nd Gen Xeon Scalable, up to 16 cores

2 × third-generation Xeon Scalable, maximum 32 cores

Memory slots

24 (12 + 12)

4 UDIMM

16 (10 + 6)

16

Memory, maximum

3 TB, up to 2933 MT/s

128 GB, up to 3200 MT/s

1 TB, up to 2666 MT/s

1 TB, up to 3200 MT/s

Drives

up to 24 SFF or 12 LFF, up to 8 NVMe

up to 8 LFF

up to 16 SFF or 8 LFF

up to 24 SFF or 8 LFF + 8 NVMe

PCIe slots

8 × PCIe 3.0

4: two Gen4, two Gen3

5 × PCIe 3.0

3 × Gen4 x16 and 1 × Gen3 x8

Chassis

4U tower, 5U in a rack

4.5U tower

5U tower

5U tower

Dell T350 — a single-processor tower: up to 128 GB of memory and 8 3.5″ drives. It is enough for files and 1C in a small office without virtualization. The ML350 is needed when you require more than 128 GB of memory, more than eight drives or two processors.

Dell T440 — a contemporary of the ML350 on the same Xeon Scalable processors, but its memory slots are split 10 + 6: the second processor gets six modules, and the ceiling is 1 TB at 2666 MT/s. The supported processor table in its Technical Guide lists models up to 16 cores and 105 W. The ML350 wins in memory capacity, number of PCIe slots and higher-end processors.

Dell T550 — already the next generation: third-generation Xeon Scalable processors (up to 32 cores), DDR4-3200 memory, a PCIe 4.0 bus and an option with 8 NVMe alongside 8 3.5″ drives. It is chosen for newer hardware and NVMe. The ML350 Gen10 — when PCIe 3.0 is enough and 24 memory slots and 8 expansion slots matter.

Below it in the HPE line is the single-processor tower ML30 Gen10 for small tasks.

How to configure the ML350 for the task

One processor or two. The second processor unlocks 12 more memory slots and PCIe slots 5–⁠8. For a file server with one or two virtual machines, one is enough, as in the Silver 4208 build; for several VMs and a terminal server — two, as in the build on two Silver 4210R.

Per-core licenses. Windows Server Standard requires at least 16 core licenses per server and 8 per processor: a server with one 8-core Silver 4208 and one with two such processors cost the same to license — 16 cores. VMware vSphere has a floor of 16 cores per socket, so a pair of 10-core Silver 4210R processors is licensed as 32 cores.

Memory. Add modules in sixes per processor so that all channels are populated: 12 modules of 16 GB across two processors give 192 GB with even population. Modules should be of the same type and size.

Drives. The base 8 SFF box is for SSDs for the system, 1C and virtual machines. For files and backups, add a 4 LFF cage for high-capacity HDDs — a mixed configuration is allowed. The usable capacity of RAID 6 and RAID 10 is compared by the RAID calculator; ready-made storage options are on the file servers and backup serverspage.

Networking and power. For 10 Gbps, plan for a PCIe adapter and a slot for it. For 1+1 redundancy you need a second Flex Slot power supply of the same model, and a server in an office should be connected to a UPS.

What to check on a refurbished ML350 Gen10

  • Power supply type. Hot-swap Flex Slot or a standard 500 W without hot swap — this determines whether you can simply insert a second unit.
  • Fans. A dual-processor build should have six; additional cages or NVMe require the 874572-B21 kit.
  • Controller battery. The P408i controller from the ready-made builds needs a Smart Storage Battery — make sure the battery is in place and the status in iLO is green.
  • Firmware and logs. Firmware is updated with the SPP (Service Pack for ProLiant) bundle, and the failure history is stored in the Active Health System; the installed license is also visible there, in iLO.
  • Completeness. The front panel key, drive trays (not just blanks) for the bays where you plan to install drives, and the 874578-B21 kit if the server will go into a rack: for tower models it is an option.
  • Drives. Ready-made builds come without drives; check previously used drives via SMART before installation — power-on hours and reallocated sectors.

Servix terms: warranty 12 months, serviced by Servix; made to order within 2–⁠3 weeks, the price is fixed in the invoice; free delivery within Tashkent.

Related models.

Refurbished · Gen10 · Tower · 2 sockets

ML350 Gen10

HPE ProLiant

from 34,912,000 UZS3 configurations · all refurbished

Questions and answers

What does HPE ProLiant ML350 Gen10 cost?

34,912,000 UZS. Prices in UZS, invoice with 12 % VAT. Table prices are current; a manager confirms them when you order.

ML350 Gen10: new or refurbished?

All 3 configurations in the catalog are refurbished. Condition is shown on each product page.

What is the ML350 Gen10 lead time?

Made to order, 2–3 weeks; the exact lead time and price are confirmed in the invoice.

What is the ML350 Gen10 warranty?

Warranty: 12 months on all equipment (new, refurbished and used), serviced by Servix.

Can the ML350 Gen10 be configured for my workload?

Click “Request a quote” and describe your task: we will match a configuration to your workload and budget.

How does ML350 Gen10 differ from ML30 Gen10?

Per catalog data (ML30 Gen10 vs ML350 Gen10): memory up to 64 GB vs up to 3 TB.

Need a quote?

Leave a phone number or Telegram — we will send the configuration, price in UZS and lead time. Invoice with 12% VAT.

Installation and support — KP Solutions

Need more than hardware? Our integrator partner will install your servers and network, configure them and provide ongoing support.

Go to the KP Solutions website ↗