Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant DL325 and DL345 Gen12: single-socket servers on AMD EPYC 9005

Servix technical team · Updated

In brief. DL325 Gen12 and DL345 Gen12 are HPE single-socket servers on AMD EPYC 9005: DL325 in a 1U chassis, DL345 in 2U with more drives and slots. The point of the line is that one EPYC socket provides twelve memory channels and a core count that previously required two Intel processors — and virtualization licenses are counted by sockets and cores. These models are not yet in the Servix catalog; the closest single-socket machine in the catalog is HPE ProLiant DL320 Gen11 on Intel Xeon for 41,000,000 UZS.

Jump to: what these machines are · EPYC 9005: cores and channels · why one socket · DL325 or DL345 · what is available now · questions and answers

What these machines are

HPE has moved the Gen12 generation to AMD EPYC 9005 (code name Turin) and kept the naming logic: DL325 is a single-socket 1U, DL345 is a single-socket 2U. The difference between them is the same as between 1U and 2U in any line: the second has more drive bays, more expansion slots and the option to install an accelerator.

It is important that both machines are single-socket. This is not a cut-down version of a dual-socket platform but a deliberate class: one modern EPYC handles a workload for which a pair of processors was purchased five years ago.

EPYC 9005: cores and channels

  • Cores. The higher-end models of the line provide noticeably more cores per socket than any single-socket Intel. For container and multi-threaded workloads, this is a direct gain.
  • Memory. Twelve DDR5 channels per socket versus eight for Xeon. The rule “populate channels, not slots” is stricter here: to get the rated bandwidth, you need twelve modules.
  • PCIe lanes. EPYC traditionally has more of them than a single-socket Xeon, so more NVMe drives with full x4 lanes fit in 1U — where a competitor would have to split the bandwidth.

The flip side is the thermal envelope. The higher-end EPYC 9005 models run so hot that in 1U they require enhanced cooling, and sometimes a liquid cooling loop. The fan kit in such configurations is not an option but a mandatory order item.

Why one socket is not a compromise

The argument here is the same as for single-socket Intel, only stronger. VMware's licensing minimum is 16 cores per physical processor: two weak CPUs in a dual-socket machine are billed as 32 cores, one strong one as 16. Windows Server is licensed from 16 cores per server and at least 8 per processor.

The second argument is NUMA. In a single-socket system there is one memory node, and a large virtual machine cannot end up split between processors. This is what most often explains the fluctuating performance of databases and 1C on dual-socket servers where nobody kept track of VM sizes. A detailed analysis of this logic is in the DL320 Gen11 review.

When two sockets are still needed: more memory than one socket can hold; processor-level redundancy is required by an internal standard; many expansion cards are needed at once — two FC HBAs, two 25G network adapters and an external RAID controller.

DL325 or DL345

Model

Chassis

Sockets

When to choose

DL325 Gen12

1U

1

Density per rack unit, virtualization node, edge site

DL345 Gen12

2U

1

Drives, expansion slots or an accelerator are needed with a single processor

DL385 Gen12

2U

2

Two EPYC sockets: maximum cores and memory in one system

A practical rule: if you are counting drives and slots, choose 2U; if you are counting rack units, choose 1U. DL325 and DL345 share the same processor base, so the choice of chassis does not change performance.

What is available now

Gen12 on EPYC is supplied made to order — lead time and price are confirmed on request. From the catalog, the same tasks are covered by:

Model

Class

Price

HPE ProLiant DL320 Gen11

single-socket 1U on Intel Xeon Scalable

41,000,000 UZS

HPE ProLiant DL360 Gen11

dual-socket 1U

40,000,000 UZS

HPE ProLiant DL380 Gen11

dual-socket 2U for drives and cards

49,000,000 UZS

Dell PowerEdge R760

dual-socket 2U, an alternative from Dell

price on request

We will calculate the configuration and compare the total cost of ownership including licenses — it is often this, not the hardware price, that settles the choice between one and two sockets. Write to us.

Questions and answers

How does DL325 Gen12 differ from DL345 Gen12?

Only by the chassis and what follows from it: DL325 is 1U, DL345 is 2U with more drive bays, expansion slots and the option to install an accelerator. Both have the same processor — a single-socket AMD EPYC 9005.

How many memory channels does EPYC 9005 have?

Twelve per socket versus eight for Intel Xeon Scalable. To get the rated bandwidth, all twelve must be populated: a configuration with eight modules leaves a third of the channels empty.

Are DL325 or DL345 Gen12 available in Tashkent?

These models are not yet in the Servix catalog — supplied made to order. From the catalog, the closest single-socket machine is DL320 Gen11 on Intel for 41,000,000 UZS.

Is one EPYC more cost-effective than two Xeons?

In terms of licenses — almost always yes, because the minimums are counted per physical processor. In terms of hardware — it depends on the model: higher-end EPYC processors are expensive. You need to calculate the total, including memory (twelve modules instead of eight) and licenses for the entire service life.

Is an enhanced cooling kit needed?

For the higher-end EPYC 9005 models in a 1U chassis — yes, it is a mandatory order item. If it is omitted, the server will throttle under load or will not accept the selected processor.

Related reading

HPE introduced ProLiant Gen12 on Intel Xeon 6

ProLiant Gen12 on Intel Xeon 6: more cores and memory channels, new iLO, firmware protection. When a generation change is justified and when Gen11 from the catalog is the better deal.