Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant Gen11 on AMD EPYC Genoa: an overview of the DL325/DL345/DL365/DL385 line

Servix technical team · Updated

In brief. Gen11 on AMD EPYC 9004 consists of four platforms: the single-socket DL325 (1U) and DL345 (2U) and the dual-socket DL365 (1U) and DL385 (2U), up to 96 cores per processor, 12 DDR5 channels and PCIe Gen5. In the Servix catalog, DL365 Gen11 and DL385 Gen11 are from 48,000,000 UZS, DL325 Gen11 10SFF — on request. The main practical limitations are not in the processor: memory must be populated in all twelve slots per socket, and higher-end 360–⁠400 W EPYC processors in a 1U chassis require a separate cooling calculation.

While the market's attention is focused on Gen12, the HPE ProLiant Gen11 line on AMD EPYC “Genoa” (9004 series) remains the optimal choice in terms of price, firmware maturity and availability. These are the very platforms that most often go into real projects in Tashkent today: lead times are predictable, compatibility with hypervisors has been verified, and the price per core is lower than that of the new generation. We look at the model range and how the platforms differ in practice — not by marketing tables but by the details that come up during installation.

HPE ProLiant DL385 Gen11 specifications (2U, two sockets)

HPE ProLiant DL385 Gen11 specifications (2U, two sockets)

Gen11 model range on AMD EPYC

Model

Form factor

Sockets

Cores (max)

DIMM slots

Notes

DL325 Gen11

1U

1

up to 96

24

up to 3 TB of RAM, PCIe Gen5 — a dense single-socket node

DL345 Gen11

2U

1

up to 96

24

the same processor, but more room for drives and cards

DL365 Gen11

1U

2

up to 192 (384 threads)

24

two 96-core CPUs in 1U — maximum density per unit

DL385 Gen11

2U

2

up to 192 (384 threads)

24

headroom in cooling and expansion slots

Note the memory slots column: the single-socket DL325 and DL345 have the same 24 slots as the dual-processor models, because an EPYC socket has 12 channels with two DIMMs per channel. In the dual-socket DL365 and DL385, the 24 slots are split between two processors — 12 each, that is, one module per channel. This is not a typo in the specification but a feature of the layout, and it directly affects how memory capacity should be built up.

Memory: why all twelve channels need to be populated

EPYC 9004 has twelve DDR5 channels per socket. The memory controller works at full capacity only when all twelve are populated. A typical purchasing mistake is to take eight 32 GB modules “as we are used to on Xeon”: the capacity will be the same 256 GB, but bandwidth will drop by about a third, and on memory-sensitive tasks (analytics, large DBMS, dense virtualization) this shows up in tests immediately.

The correct population scheme: 12 modules per processor, identical in capacity, speed and rank. For the dual-socket DL385, that is 24 modules. Hence the practical configurations: 12 × 16 GB = 192 GB, 12 × 32 GB = 384 GB, 12 × 64 GB = 768 GB per socket. DDR5-4800 speed holds with one module per channel; if you populate two DIMMs per channel on a single-socket platform, the frequency drops — capacity grows, speed falls, and this is a deliberate trade-off.

One more detail: modules of different ranks cannot be mixed within a processor — the controller will align everything to the worst one. If memory is purchased a year later, you need to buy the same part number, not “the same capacity”.

Disk subsystem and controllers

Drive layout is the second most common source of ordering mistakes. In Gen11, the backplane is chosen at the assembly stage and can later be changed only by disassembling the chassis, so the decision must be made right away:

  • 1U (DL325, DL365) — 8 or 10 SFF bays. The 10-bay option is designed for NVMe with direct connection to the processor, without a RAID controller in the path.
  • 2U (DL345, DL385) — from 8 to 24 SFF or 12 LFF. The 24 SFF configuration requires two or three backplanes and, accordingly, additional cables and an adapter with more ports.
  • Controllers — the MR/NS line: from the NS204i-u boot device (two M.2 drives in a mirror for the hypervisor) to the MR416i with 8 GB of cache for large arrays. Tri-mode makes it possible to run SAS, SATA and NVMe on a single adapter, but NVMe performance through a controller is lower than with a direct connection.

A practical rule: the hypervisor goes on a separate mirrored pair of M.2 drives, data goes on the main array. This avoids a situation where a rebuild of the data array interferes with the hypervisor itself. RAID levels and typical mistakes when choosing them are covered in a separate article — RAID and the server disk subsystem.

HPE ProLiant DL365 Gen11 specifications (1U, two sockets)

HPE ProLiant DL365 Gen11 specifications (1U, two sockets)

Power and cooling: what a 400-watt socket requires

Higher-end EPYC 9004 processors have a TDP of 360–⁠400 W. Two such processors in the 1U chassis of DL365 mean 800 W for the CPUs alone, plus memory, drives and adapters. This has three consequences that must be taken into account before ordering:

  • Power supplies. For high-end configurations, 1,600–⁠1,800 W power supplies are used, and always in pairs — redundancy here is not a luxury but a condition for operating under peak load.
  • Room temperature. For dense 1U configurations, HPE limits the maximum inlet temperature — at 30–⁠35 °C, higher-end processors in 1U are either not supported or require a high-performance fan kit. In Tashkent server rooms with household split air conditioners, this is a real risk: in summer, if the air conditioner fails, the temperature exceeds the limit within half an hour.
  • Noise and rack. 1U with high-speed fans means 75–⁠80 dB. If the server is not in a dedicated server room but in an office or a back room, the 2U DL385 chassis with larger fans will be both quieter and cooler with the same configuration.

The practical takeaway: unless you are severely short of rack units, it is better to choose 2U for higher-end processors. The density advantage of 1U is eaten up by climate requirements and TDP restrictions.

What is in the catalog and how much it costs

Platform

Processor

Form factor

Price

DL325 Gen11 10SFF

AMD EPYC 9004

1U, 1 socket

on request

DL365 Gen11

AMD EPYC 9004

1U, 2 sockets

from 48,000,000 UZS

DL385 Gen11

AMD EPYC 9004

2U, 2 sockets

from 48,000,000 UZS

DL360 Gen11

Intel Xeon Scalable

1U, 2 sockets

from 40,000,000 UZS

DL380 Gen11

Intel Xeon Scalable

2U, 2 sockets

from 49,000,000 UZS

Prices are for base configurations and vary depending on processors, memory capacity and drives — the final amount is put together for the task. Intel models are listed for comparison: with similar chassis prices, the difference comes from processors and licenses, and it must be calculated together with the software. A detailed calculation method is in the article how much a server costs in Tashkent, and a comparison of the platforms themselves is in the guide AMD EPYC or Intel Xeon.

The Arm option: ProLiant RL300 Gen11

The family also includes the RL300 Gen11 on Ampere Altra Max — a server on Arm architecture processors with a high number of energy-efficient cores. The niche is narrow but clear: cloud and scale-out workloads — web, microservices, containers — where density per watt matters and where all the software is already built for Arm. Compatibility must be checked in advance and across the entire stack: hypervisor, backup agent, monitoring agent, adapter drivers. If even one component exists only for x86, the electricity savings will not pay for rewriting the surrounding tooling.

HPE ProLiant RL300 Gen11 on Ampere Altra (Arm architecture)

HPE ProLiant RL300 Gen11 on Ampere Altra (Arm architecture)

Moving from Gen10 Plus: what carries over and what does not

A common scenario: a new Gen11 is installed next to a running DL325 Gen10 Plus v2, the workload moves over, and the old server goes into reserve or is used for testing. What is important to know in advance:

  • Memory does not carry over. Gen10 Plus uses DDR4, Gen11 uses DDR5. The modules are physically incompatible.
  • Drive trays are different. Drives from Gen10 Plus will not fit into a Gen11 chassis without new drive trays, and these need to be ordered together with the server.
  • Management has changed. iLO 5 on Gen10 Plus, iLO 6 on Gen11: the interface and part of the API differ, so automation scripts and monitoring templates will have to be checked.
  • The processor uses a different socket. SP3 on Gen10 Plus versus SP5 on Gen11: the CPU cannot be moved.
  • What carries over. OCP and PCIe network adapters, optics and DAC cables, rack rails (partially, depending on depth), management licenses — provided the versions match.

Live migration of virtual machines between Gen10 Plus and Gen11 within the same processor vendor is possible with cluster compatibility mode enabled (EVC in VMware, an equivalent in Proxmox) — but with a reduction to the common instruction set. AMD and Intel cannot be mixed in one cluster in any mode.

How to choose

  • Single-socket DL325 and DL345 — when density and savings are needed: one such server often replaces a pair of old dual-processor ones, reducing both power consumption and licensing costs where licenses are counted per socket.
  • Dual-socket DL365 and DL385 — for heavy virtualization, large DBMS and maximum cores in one chassis.
  • DL385 (2U) — the default choice for a regular server room: headroom in cooling, slots and drives with the same processor base as the 1U.
  • DL365 (1U) — when rack units are scarce and the room climate is properly controlled, not by a household air conditioner.

What to check before ordering

  • Whether memory is populated with 12 modules per processor — or whether the configuration loses a third of its bandwidth from the start.
  • Whether the backplane is chosen for the required number of drives: changing it later means disassembling the server.
  • Whether there is a separate boot device for the hypervisor (NS204i-u or a pair of M.2 drives).
  • Whether the room keeps the server inlet temperature year-round, with a margin for an air conditioner failure.
  • Whether the UPS capacity and rack power circuits are sufficient: a pair of 1,600 W power supplies is not a load you can hang on a household extension cord.
  • Whether the platform matches what is already in the cluster: AMD and Intel cannot be mixed in one virtualization cluster.

Gen11 on EPYC 9004 means mature firmware, wide availability and, as a rule, the best price for performance here and now. We will put together a specific configuration for the task, calculate power and cooling and compare it with Gen12 if you are planning for a 5+ year horizon — write to us. Platforms with prices are in the section Servers and in the selection ProLiant Gen11.

Source and photos: ServeTheHome, Cliff Robinson, 01.11.2022 — servethehome.com. Published with attribution.

Questions and answers

How does DL365 differ from DL385?

The processor base is the same — two SP5 sockets for EPYC 9004. The difference is the chassis: DL365 is 1U, DL385 is 2U. The 2U has more drive bays (up to 24 SFF versus 10), more expansion slots and substantially better cooling, which is important for processors with a TDP of 360–⁠400 W. 1U is chosen only when rack density is critical.

How many memory modules should be installed in Gen11 on EPYC?

Twelve per processor — matching the number of DDR5 channels. A configuration of eight modules will work but will lose about a third of its memory bandwidth. For a dual-socket server, that means 24 identical modules.

Can drives and memory be moved from an old DL325 Gen10 Plus?

Memory — no: Gen10 Plus runs on DDR4, Gen11 on DDR5. Drives can be moved, but they need new-style drive trays, which are ordered together with the server. Network adapters, optics and DAC cables carry over as standard.

What to choose if there is only one free unit in the rack?

DL325 Gen11 — a single-socket 1U platform with up to 96 cores and 3 TB of memory. In total performance it replaces a previous-generation dual-processor server, and with licenses counted per socket it costs half as much. If you specifically need two sockets in one unit — DL365 Gen11, but with a check of the room climate.

Related reading