Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

Dell PowerEdge T150, T350, R250 and R350: how to choose an entry-level server

Servix technical team · Updated

In brief. The four entry-level PowerEdge models differ in two things: the chassis (T is tower, R is rack) and the number of drive bays. T150 is a tower for four 3.5″ drives from 13,808,000 UZS, T350 is a tower for eight from 25,799,000 UZS, R250 is a 1U rack server for four from 20,500,000 UZS, R350 is a 1U rack server for eight 2.5″ drives from 20,542,000 UZS. They all have the same processor — Intel Xeon E, up to 8 cores, error-correcting memory up to 128 GB. The main trap is not in choosing the model but in the controller and the lack of hot swap in the entry configurations.

Jump to: the difference in one table · tower or rack · drives: 3.5″ or 2.5″ · processor and memory · controller and hot swap · catalog prices · what to check · questions and answers

The difference in one table

Model

Chassis

Drives

Drive format

Price from

PowerEdge T150

tower

4

3,5″ LFF

13,808,000 UZS

PowerEdge T350

tower

8

3,5″ LFF

25,799,000 UZS

PowerEdge R250

1U rack

4

3,5″ LFF

20,500,000 UZS

PowerEdge R350

1U rack

8

2,5″ SFF

20,542,000 UZS

Everything else — processor base, memory, networking, iDRAC management — is common to all four models. So the choice comes down to two questions: is there a rack, and how many drives are needed.

Tower or rack

This is not a matter of taste but a matter of the room. A tower stands on the floor in a back room or an office: it is quieter, needs no rack or mounting, and is easier to move. A 1U rack server assumes that a rack already exists — otherwise the server will have to be laid on a shelf, and ventilation will stop working as intended.

Noise is an underestimated factor. In 1U, the fans are small and high-speed, because cooling has to be done through 44 mm of height. In a tower, the fans are large and slow for the same heat dissipation. If the server stands in a room where people work, a tower is the only option that will not turn into complaints within a week.

The flip side: a tower takes up floor space and does not lock. For a branch without a server room, this is more often a plus; for an office with a rack, a minus.

Drives: four or eight, 3.5″ or 2.5″

The number of bays is the second most important parameter, and the one that cannot be changed after purchase: the backplane is changed together with the chassis.

  • Four 3.5″ bays (T150, R250). Maximum capacity for minimum money: four 8–⁠16 TB drives give tens of terabytes. But in RAID 6 of four drives, half of the capacity goes to parity, and RAID 5 should not be built on drives of this size — why is explained in the guide on RAID and the disk subsystem.
  • Eight 3.5″ bays (T350). The same principle, but with twice the headroom: RAID 6 of eight drives loses only a quarter of its capacity to parity.
  • Eight 2.5″ bays (R350). A format for SAS and SATA SSDs. The capacity per drive is lower, but random operations per second are many times higher — this is a configuration for a database and 1C, not for a file archive.

A practical rule: if the main workload is storage, choose 3.5″; if it is a database or virtualization, choose 2.5″ and SSDs. A mixed option is not provided in these chassis.

Processor and memory: where the line's limit is

All four models are built on Intel Xeon E — a single-socket platform with up to eight cores and up to 128 GB of memory. The catalog includes three typical processors: E-2314 (4 cores, entry-level), E-2324G (4 cores, higher clock speed) and E-2334 (4 cores, even higher clock speed and more cache).

This leads to the main limitation of the line. Eight cores and 128 GB are the ceiling, not the starting point: the platform is suitable for virtualization with five or six machines, but not for twenty. If the calculation shows you need more memory or cores, look not at the top T350 configuration but at the next class — PowerEdge R760 with two sockets and memory measured in terabytes (price on request).

Memory is error-correcting, and this is not marketing: in a server that runs for years without a reboot, single-bit errors in modules occur regularly, and ECC turns them into log entries instead of corrupted data. It is better to expand memory right away: T150 with 128 GB is now on request, and the build with 32 GB costs 17,012,000 UZS versus 13,808,000 UZS for the entry configuration — the difference is less than buying modules one at a time later.

Controller and hot swap — where mistakes are most common

Two things that are not included by default in the entry class and that people find out about only after the purchase.

RAID controller. In the base configuration, drives may be served by a software controller on the chipset. It works, but it has no write cache, depends on the operating system driver and handles moving the array to another server poorly. For a production workload, you need a hardware controller: PERC H345 (4,312,941 UZS) for simple volumes and HBA mode, or PERC H755 with cache and battery (8,625,882 UZS) if you need RAID 5 or 6 with fast writes.

Hot swap. The entry configurations of T150 and R250 come with cabled drives without a backplane — such a drive can be replaced only with the server powered off. This is fine for a server in the next room and unacceptable for a branch in another city. Ask about a hot-swap backplane when ordering: from the outside, the chassis looks the same.

System boot. Giving two of the four bays to the hypervisor is wasteful. The solution is Dell BOSS — a card with two M.2 drives in a hardware mirror, which the system sees as a single boot volume. The card model is tied to the server: the BOSS-S2 from the catalog (7,907,058 UZS, two 480 GB M.2 SATA drives) is designed for 15th generation PowerEdge; confirm compatibility with a specific model when ordering.

Catalog prices as of November 2026

The price spread within one model is explained by the processor and memory: T150 costs from 13,808,000 UZS with an entry-level Xeon and 8 GB to 17,012,000 UZS with Xeon E-2334 and 32 GB (the build with 128 GB is on request). This is why a “server price” without a configuration means nothing — a detailed analysis is in the article how much a server costs in Tashkent.

What to check before ordering

  • Whether there is a rack. No rack means a tower, no alternatives.
  • How many drives are needed for the entire service life: four or eight. It cannot be changed later.
  • 3.5″ for capacity or 2.5″ for speed — determined by the workload, not by price.
  • Hot-swap backplane — whether the selected configuration has one.
  • A hardware RAID controller and cache protection, if RAID 5 or 6 is needed.
  • A separate boot module so the hypervisor does not occupy drive bays.
  • A second power supply: entry configurations often have only one.
  • iDRAC license level — the remote console is available only in Enterprise.

We will select a configuration for the task and tell you honestly if the entry-level line is not enough and it is better to go one class higher right away. Write to us; all PowerEdge configurations with prices are here.

Questions and answers

How does T150 differ from T350?

By the number of drive bays and power headroom: T150 has four 3.5″ bays, T350 has eight, and its chassis is designed for a higher thermal envelope. Both have the same processor base — Intel Xeon E. If four drives are enough for the entire service life, there is no reason to overpay for T350.

How does R250 differ from R350?

By the drive format: R250 takes four 3.5″ drives for capacity, R350 takes eight 2.5″ drives for speed. Both are 1U rack servers on a single Xeon E processor. R350 is chosen for databases and 1C, R250 for a file server and backups.

How much does a Dell PowerEdge T150 cost in Tashkent?

From 13,808,000 UZS for a configuration with Xeon E-2314 and 8 GB of memory to 17,012,000 UZS with Xeon E-2334 and 32 GB; the build with 128 GB is on request. The price depends on the processor, memory capacity, drives and whether there is a hardware RAID controller.

Can drives be hot-swapped?

It depends on the configuration. Entry builds come with cabled drives without a backplane — replacement only with the server powered off. Hot swap is available in configurations with a backplane, and it is a separate order item that should be checked in advance.

Is an entry-level PowerEdge enough for virtualization?

For five or six small virtual machines — yes, provided there are SSDs and 64–⁠128 GB of memory. The ceiling of the line is eight cores and 128 GB, and what hits it is not processor performance but memory: with ten machines, memory will run out first.

What to choose if more memory and cores are needed?

The next class is the dual-socket PowerEdge R760 (price on request). Moving from Xeon E to Xeon Scalable is a noticeable step up in price, so the workload should be calculated before purchase.

Related reading

Rack or tower server: which to choose

Rack or tower server: a 19″ cabinet or an office, noise from 22 to 49 dBA, 1U and 2U, which HPE and Dell towers fit into a rack and what is cheaper with the same components.