HPE
HPE ProLiant DL360 G10 Fan
Fan module, standard · HPE ProLiant DL360 Gen10 · Up to 7 pcs., redundant
575,058 UZS

About the model.
In brief. HPE DL360 G10 Fan is a new standard fan module for the 1U HPE ProLiant DL360 Gen10 server. It is suitable for replacing a failed fan and for equipping a server in a typical configuration. The module is hot-swapped, without tools and without stopping the server.
What is in this configuration
- Type: fan module, standard
- Compatibility: HPE ProLiant DL360 Gen10
- Quantity per server: up to 7 pcs., redundant
- Replacement: hot swap (hot-plug), tool-free
- Restriction: do not mix with high performance modules
- Diagnostics: HPE iLO sensors and log
- Brand: HPE
The module is for those who maintain DL360 Gen10 servers: to keep a spare fan on hand or quickly replace a failed one. The chassis holds up to seven redundant modules, so a single fan failure does not stop the server. A fault is visible in the sensors and the iLO log — the module should be replaced right away, without waiting for the system to switch to high fan speed mode.
Before ordering, check which fans are currently installed in the server. Standard modules are designed for typical DL360 Gen10 configurations. For high-TDP processors, GPU accelerators and strict temperature requirements, HPE prescribes the High Performance Fan Kit. Standard and high performance modules cannot be mixed in one server, so such an upgrade replaces the entire set.
Replacement is done without tools: the module is pulled out by its lever, a new one is put in its place, and the server keeps running.
Servix terms. The item is new, warranty 12 months, serviced by Servix. Delivery within Tashkent is free, to the regions by arrangement. Made to order, lead time 2–3 weeks, the price is fixed in the invoice, prices include 12% VAT. Unopened items can be returned within 10 days at the office. For a quote, write to [email protected]: server model and part number, the number of modules needed, the type of fans currently installed, and company details for the invoice.
Questions and answers
Can this module be installed together with high performance fans?
No. Standard and high performance modules are not mixed in one server.
Do I need to shut down the server for replacement?
No. The module supports hot swap (hot-plug) and is installed without tools.
How many modules are installed in a DL360 Gen10?
Up to 7 pcs., redundant: if one module fails, the server keeps running.
How can I tell that a fan is faulty?
Module status is shown by sensors and in the HPE iLO log.
Specifications
Other
- Type
- Fan module, standard
- Compatibility
- HPE ProLiant DL360 Gen10
- Quantity per server
- Up to 7 pcs., with redundancy
- Replacement
- Hot swap (hot-plug), tool-free
- Restriction
- Do not mix with high performance modules
- Diagnostics
- HPE iLO sensors and log
- Brand
- HPE

Available to order, 2–3 weeks, Ships by December 7
Buy HPE DL360 G10 Fan
Condition: new.
Installation and support — KP Solutions
Installation, setup and maintenance of equipment — from our integrator partner.
Similar products
Available to order, 2–3 weeks
HPE DL160 G10 Fan
HPE
Fan module, 40 mm · HPE ProLiant DL160 Gen10 · 40 × 40 × 28 mm
Available to order, 2–3 weeks
HPE DL360 High Performance Fan
HPE
Fan module, high performance · HPE ProLiant DL360 Gen10 · 871244-B21 — 7 fans
Available to order, 2–3 weeks


