Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

A new generation of servers: Intel Xeon 6 and AMD EPYC 9005

Servix technical team · Updated

Server platforms have been updated: Intel has released the Xeon 6 family of processors, and AMD the EPYC 9005 series. Following them, server manufacturers have introduced new platform generations — HPE ProLiant Gen12 and Dell PowerEdge 17G. We look at what this changes in practice and whether purchasing plans should be reconsidered.

Intel Xeon 6

The main architectural change is the split of the line into two core types:

  • P-cores (Performance) — performance cores for tasks sensitive to single-thread speed: databases, ERP systems, applications with per-core licensing.
  • E-cores (Efficient) — efficient cores, of which significantly more fit per socket. They are aimed at scale-out workloads: web servers, microservices, container platforms, where total density matters rather than single-thread speed.

This split, for the first time, forces you to choose the processor type based on the nature of the workload, not only on the number of cores and frequency. For consolidating a large number of light services, E-cores give better density per unit and per watt; for a heavy transactional DBMS, the right choice is P-cores.

AMD EPYC 9005

The Turin line continues AMD's strategy: very high core density per socket and a large cache. The practical result is fewer physical servers for the same workload, which directly affects two parameters: occupied rack space and the cost of hypervisor licenses, if they are counted per socket.

A separate line with enlarged cache is aimed at tasks where data does not fit well into the cache of standard models — engineering simulation, analytics, certain classes of DBMS.

What changes at the platform level

Component

Practical consequence

Higher-frequency DDR5 memory

Increased bandwidth — important for virtualization and analytics

PCIe Gen5, the arrival of CXL

More bandwidth for 100/200GbE adapters and next-generation NVMe

Higher power consumption of high-end models

Recalculate the rack power budget and cooling capacity before purchasing

Stricter cooling requirements

For dense configurations, liquid cooling is increasingly being considered

Should you switch right now

Yes, if: you are launching a new project with an operating horizon of 5+ years; you are hitting the ceiling on rack density; you pay for licenses per socket and consolidation gives direct savings; the growing power consumption of your fleet has become a problem.

Not necessarily, if: the current infrastructure meets your needs; an existing cluster is being expanded and node homogeneity matters; the budget is limited. The previous generations — HPE ProLiant Gen11 and Dell PowerEdge 16G — remain fully relevant platforms on 4th/5th generation Xeon Scalable and EPYC 9004, with mature firmware and a better price-to-performance ratio.

Practical takeaway

A generation change always has two prices: the equipment itself and the infrastructure for it. Before planning the purchase of the newest platform, check whether your server room can handle the increased heat output and whether the UPS capacity is sufficient. It is often more economically sensible to take the previous generation in a good configuration than a new one that requires upgrading the facility infrastructure.

We will help compare the options using the specific figures of your workload — including calculations for power consumption and licenses. Write to [email protected] or on Telegram.

Illustration: Geekerwan (极客湾), Wikimedia Commons (CC BY 3.0).

Related selections and tools: Server processors, HPE ProLiant Gen11, Dell PowerEdge.

Related reading

HPE introduced ProLiant Gen12 on Intel Xeon 6

ProLiant Gen12 on Intel Xeon 6: more cores and memory channels, new iLO, firmware protection. When a generation change is justified and when Gen11 from the catalog is the better deal.