Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

Dell PowerEdge R770 review: a modular 2U server on Intel Xeon 6

Servix technical team · Updated

In brief. R770 is the next generation of Dell's mainstream dual-socket 2U: Intel Xeon 6 processors with performance cores, DDR5 memory with MRDIMM support, PCIe 5.0 and modular mechanics in which I/O and power are serviced without pulling the server out of the rack. The main difference from R760 is not in clock speeds but in density: there are noticeably more cores per socket and twelve memory channels instead of eight. It is worth buying when the workload is limited by core count or memory bandwidth; in all other cases, R760 remains the better buy.

Jump to: what Xeon 6 is · what “modular” means · MRDIMM and twelve channels · E3.S and NVMe drives · who needs it and who does not · what to buy today · questions and answers

What Intel Xeon 6 is

Xeon 6 is the first generation in which Intel split the line into two different core types, and this matters more than the model number.

  • P-cores (6700P and 6900P series) are the familiar performance cores. This is what goes into R770: general-purpose workloads, virtualization, databases, everything where single-thread speed matters.
  • E-cores (6700E and 6900E) are efficient cores, of which there are physically more on the same socket. The point is container and web workload density, where the total matters rather than an individual thread.

The practical takeaway: when comparing R770 with R760, look not at “Xeon 6 is newer than Xeon Scalable” but at the specific processor model and at what limits your workload. Virtualization licenses are counted per core, and a server with 86 cores per socket costs more in licenses than two smaller servers.

What “modular” means

Dell has redesigned the mechanics: I/O modules, fans and part of the power system are serviced from the front or rear, without sliding the server out on its rails. It sounds like a minor detail, but in a dense rack it is the difference between “replaced the card in five minutes” and “disconnected the cables, pulled out the chassis, knocked out the neighboring patch cord”.

The second consequence of modularity is standardization. The same I/O modules fit different models of the generation, so the spare parts stock on site is smaller. For an organization with a dozen servers, this is real savings on inventory; for a single server, it is not.

MRDIMM and twelve channels

The main technical change of the generation is memory. Xeon 6 with P-cores provides twelve channels per socket versus eight in the previous generation, and with MRDIMM modules it raises the effective speed even higher by interleaving two ranks.

For the server, this means the rule “populate channels, not slots” becomes stricter: to get the rated bandwidth, you need twelve modules per processor, that is, twenty-four per dual-socket machine. A configuration with eight modules on R770 not only fails to unlock the platform — it can lose to a correctly built R760 for the same money.

MRDIMM is more expensive than regular RDIMM and makes sense where the workload is really limited by memory: analytics, large databases, computational tasks. For a file server and typical virtualization, it is overspending.

Drives: E3.S instead of the familiar 2.5″

In the new generation, Dell is promoting the EDSFF E3.S format — a “ruler” instead of a square bay. Density is higher, cooling is better, and most importantly, each drive gets full PCIe 5.0 lanes directly from the processor.

There is only one downside, but a significant one: E3.S drives are not compatible with the 2.5″ cages of previous generations. If the site has a stock of U.2 or U.3 drives, they cannot be moved into such a cage. This should be taken into account when planning the fleet: a mixed fleet of R760 and R770 with different drive formats means two spare parts stocks instead of one.

The RAID level and the number of drives are calculated by the same rules as before — see the guide on RAID and the disk subsystem.

Who needs it and who does not

  • Needed: the workload is limited by the number of cores per socket; analytics and databases sensitive to memory bandwidth; a dense fleet where standardized spare parts save real money; 100G and NVMe are planned without compromises on PCIe lanes.
  • Not needed: file server, domain, 1C for dozens of users, typical virtualization for five to ten machines. Here the platform sits idle, and licenses are counted for cores you do not use.

What to buy today

R770 is not yet in the Servix catalog — made to order, lead time and price are confirmed on request. From the catalog, the same tasks are covered by:

Model

Class

Price

Dell PowerEdge R760 8SFF

dual-socket 2U, 4th/5th generation Xeon Scalable

price on request

Dell PowerEdge R760 12LFF

dual-socket 2U for capacity, 2 × Xeon Silver 4410Y

price on request

HPE ProLiant DL380 Gen11

dual-socket 2U, an alternative from HPE

49,000,000 UZS

HPE ProLiant DL320 Gen11

single-socket 1U, if the second socket is not needed

41,000,000 UZS

If the task is not to “get the newest” but to handle the workload, an honest comparison usually ends with R760 or a single-socket machine: this logic is analyzed in the DL320 Gen11 review.

We will calculate a configuration for your workload and tell you plainly whether moving to Xeon 6 pays off in your case or is overspending on a generation. Write to us.

Questions and answers

How does Dell PowerEdge R770 differ from R760?

By the processor and memory generation: R770 is built on Intel Xeon 6 with twelve memory channels per socket and MRDIMM support, R760 on 4th and 5th generation Xeon Scalable with eight channels. Plus modular serviceability mechanics and cages for E3.S drives instead of the familiar 2.5″.

What is Xeon 6 with P-cores and E-cores?

Two different lines within one generation. P-cores are performance cores for general-purpose workloads and databases; E-cores are efficient cores, there are more of them per socket, and they are designed for dense container and web workloads. R770 uses processors with P-cores.

Is MRDIMM mandatory?

No, the platform also works with regular RDIMM. MRDIMM makes sense where the workload is limited specifically by memory bandwidth — analytics, large databases, computations. For a file server and typical virtualization, it is overspending.

Will drives from R760 fit R770?

E3.S cages do not accept 2.5″ U.2 and U.3 drives. If the site has a stock of such drives, this should be taken into account when planning the fleet: a mixed fleet means two sets of spare parts.

Can I buy R770 in Tashkent?

The model is not yet in the Servix catalog — supplied made to order, lead time and price are confirmed on request. From the catalog, the same tasks are covered by R760 (price on request) and HPE DL380 Gen11 from 49,000,000 UZS.

Related reading

HPE introduced ProLiant Gen12 on Intel Xeon 6

ProLiant Gen12 on Intel Xeon 6: more cores and memory channels, new iLO, firmware protection. When a generation change is justified and when Gen11 from the catalog is the better deal.