Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

Dell PowerEdge R760 review: a mainstream 2U on two Intel Xeon processors

Servix technical team · Updated

In brief. R760 is Dell's mainstream dual-socket server in a 2U chassis: two 4th or 5th generation Intel Xeon Scalable processors, 32 DDR5 slots, PCIe 5.0, up to 24 2.5″ bays or 12 3.5″ bays, iDRAC9 management. It is a workhorse for virtualization, databases and file storage — where 1U can no longer accommodate the drives and expansion cards. The Servix catalog includes R760 8SFF and R760 12LFF with two Xeon Silver 4410Y and 32 GB; the price of both configurations is on request.

Jump to: what's inside · cages: 8, 12, 16 or 24 · memory by channels · controller and boot · expansion cards and GPU · R760 versus R660 and R750 · catalog prices · what to check · questions and answers

What's inside

  • Processors. Two 4th generation (Sapphire Rapids) or 5th generation (Emerald Rapids) Intel Xeon Scalable processors, up to 56 cores per socket in the higher-end models. The 12LFF catalog configuration has two Xeon Silver 4410Y — these are the entry-level processors of the line, chosen for the number of memory channels and PCIe lanes, not for cores.
  • Memory. 32 DDR5 slots, 16 per socket, eight channels per processor.
  • Bus. PCIe 5.0, up to eight slots depending on the risers, plus an OCP 3.0 slot for a network adapter.
  • Drives. Cages for 8, 16 or 24 2.5″ bays or for 12 3.5″ bays; NVMe connects directly to the processors.
  • Management. iDRAC9 with a separate network port; remote console and image mounting are in the Enterprise license.

Cages: the main choice when ordering

A 2U chassis gives a freedom that 1U does not have, but the chosen cage is fixed together with the backplane.

  • 12 × 3.5″ — capacity. Twelve 16–⁠22 TB drives give over a hundred terabytes in one chassis: file storage, archive, backup node. This is the configuration R760 12LFF, price on request.
  • 8 × 2.5″ — a balanced option for virtualization on SSDs: R760 8SFF, price on request.
  • 16 and 24 × 2.5″ — I/O density: databases, hyperconverged clusters, everything where what matters is not terabytes but thousands of operations per second.

What you need to count is not the number of bays but the number of PCIe lanes to the drives: full x4 for each NVMe drive is not available with every backplane option, and in dense cages some bays may work only with SAS and SATA.

Memory: 32 slots and the eight-channel rule

Each processor has eight channels with two modules per channel. The practice is the same as on single-socket platforms, but doubled: to get full bandwidth, you need sixteen modules — eight per socket. Four modules per processor leave half of the channels empty and cut memory speed roughly in half, and on a dual-socket machine this also spoils the NUMA picture: some virtual machines will end up on the “slow” socket.

The catalog configuration with 32 GB for two processors is a starting point for commissioning, not a working capacity. For virtualization, plan from 256 GB, for databases from 512 GB, and right away with sixteen modules.

Controller and system boot

For RAID 5 and 6 with fast writes, you need a hardware controller with cache and power-loss protection — PERC H730 (5,750,588 UZS) in previous-generation machines, PERC H755 in current ones. Software-defined storage (vSAN, Ceph, Storage Spaces Direct) needs the opposite scenario: PERC H345 (4,312,941 UZS) or direct drive passthrough, so that the system itself sees their status.

The hypervisor is installed not in the drive cage but on a boot module Dell BOSS-N1 — two NVMe M.2 drives in a hardware mirror, a separate boot volume. The BOSS-S2 card from the catalog is designed for the 15th generation (R650, R750, T550) and cannot be installed in R760. In 2U this is especially obvious: giving two of the twelve bays to the operating system means losing twenty terabytes.

Expansion cards and accelerators

This is most often why 2U is chosen over 1U. Eight PCIe 5.0 slots make it possible to install two FC HBAs, two 25G network adapters and an external RAID controller at the same time — such a set physically does not fit in 1U. Accelerators also live here: 2U accepts full-size dual-slot GPUs, but they require enhanced fans and higher-wattage power supplies, and these are separate configurator items.

A network adapter is better installed in the OCP 3.0 slot rather than a regular PCIe slot: the card does not take up an expansion slot and is replaced without disassembling the server. What goes where is covered in the article on network adapters and transceivers.

R760 versus R660 and R750

Model

Chassis

Xeon generation

When to choose

R760

2U

4th and 5th

Drives, expansion slots or GPUs are needed; a universal choice for virtualization

R660

1U

4th and 5th

Density per rack unit matters more than the number of drives and cards

R750

2U

3rd (Ice Lake)

Previous generation: DDR4 and PCIe 4.0, cheaper, but with no headroom in memory and bus

R770

2U

Xeon 6

Next generation with a modular architecture — when you need maximum cores per socket

The difference between R750 and R760 is not in processor performance as such but in the memory and bus generation: DDR5 versus DDR4 and PCIe 5.0 versus 4.0. For NVMe and 100G cards this is fundamental; for a SATA file server it is barely noticeable. If the budget is limited and the workload is not memory-bound, R750 remains a sensible purchase.

Catalog prices as of November 2026

What to check before ordering

  • Cage: 12 × 3.5″ for capacity, 8–⁠24 × 2.5″ for speed. It cannot be changed after assembly.
  • Sixteen memory modules instead of four — whether all channels of both processors are populated.
  • How many bays actually work as NVMe with full x4 lanes.
  • A separate boot module instead of two drives from the cage.
  • Enhanced fans and power supplies if a GPU or higher-end processors are planned.
  • An iDRAC9 Enterprise license if the server is not located in your building.
  • Rails and a cable management arm for the depth of your rack.

We will build an R760 for the task — with the right cage, memory by channels, controller and networking — and tell you if R660 or R750 is the better deal in your case. Write to us.

Questions and answers

How much does a Dell PowerEdge R760 cost in Tashkent?

The price of the catalog configurations — 8SFF and 12LFF with two Xeon Silver 4410Y and 32 GB of memory — is on request. The final price depends on the processors, memory capacity, cage, drives and controller; the calculation is done for a specific workload.

How does R760 differ from R750?

By the platform generation: R760 is 4th and 5th generation Xeon Scalable with DDR5 and PCIe 5.0, R750 is 3rd generation with DDR4 and PCIe 4.0. The chassis and cage logic are similar. For NVMe and 100G networking the difference is fundamental; for a SATA file server there is almost none.

How many drives fit in R760?

Depending on the cage — 8, 16 or 24 2.5″ drives or 12 3.5″ drives. The cage is chosen when ordering and can be changed only together with the backplane and cables.

Can a GPU be installed in R760?

Yes, the 2U chassis accepts full-size dual-slot accelerators, but they require an enhanced fan kit and higher-wattage power supplies. Both items are included in the configuration right away; otherwise the server will not accept the card or will throttle.

How much memory to install for virtualization?

From 256 GB with sixteen modules — eight per processor, to populate all channels. The catalog 32 GB for two sockets is a starting configuration for commissioning, not a working capacity.

Related reading