Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant DL380 Gen11: review, configurations and prices

Servix technical team · Updated

In brief. HPE ProLiant DL380 Gen11 is a general-purpose dual-socket 2U server on 4th and 5th Gen Xeon Scalable: 32 DDR5 slots, PCIe Gen5, up to 24 SFF bays with NVMe support, iLO 6. In the Servix catalog, the price of ready-made Gen11 builds (8LFF, 8SFF, 16SFF and 24SFF) is on request, and the base platform is 49,000,000 UZS (November 2026). For a single-service workload the platform is excessive: there it is cheaper to take the DL320 Gen11 for 41,000,000 UZS or the DL360 Gen11 for 40,000,000 UZS.

HPE ProLiant DL380 Gen11 is a dual-processor 2U server, the “workhorse” of enterprise infrastructure. It is the most versatile platform in the ProLiant lineup: it is equally well suited to virtualization, databases, file services and hyperconverged cluster nodes. We look at what has changed in the eleventh generation, how to build a configuration and who should choose this particular server.

What's new compared with Gen10

The move from Gen10/Gen10 Plus to Gen11 is not cosmetic but a change of the entire platform foundation:

  • 4th and 5th Gen Intel Xeon Scalable processors (Sapphire Rapids and Emerald Rapids) instead of Cascade Lake and Ice Lake. The number of cores per socket has grown noticeably, and built-in accelerators (QAT, DSA, IAA) have appeared.
  • DDR5 memory instead of DDR4 — higher per-channel bandwidth and eight channels per socket instead of six on some previous models. For virtualization and analytics this is noticeable; module population across channels is covered in the guide server RAM.
  • PCIe Gen5 — twice the bandwidth per lane. It becomes practically meaningful when installing 100/200GbE adapters and next-generation NVMe drives.
  • iLO 6 with a strengthened security model: silicon root of trust, firmware integrity checking, support for secure boot requirements.

The main consequence: memory and processors from old machines do not move to Gen11. What exactly carries over when changing generations and what is bought anew is covered in the article on upgrading a server fleet.

Configuration options

The DL380 Gen11 chassis is configured for the task — from a compact 8-bay version to a dense drive configuration:

Parameter

Practical guideline

Processors

1–⁠2 sockets, 4th/5th Gen Xeon Scalable, up to 64 cores per socket

Memory

32 DDR5 RDIMM slots, eight channels per processor

Drive bays

SFF bays: 8 / 16 / 24, SAS, SATA, NVMe support; 8LFF version for capacity

Controllers

HPE MR and NS series, RAID and HBA modes; NVMe requires tri-mode

Networking

OCP 3.0 plus PCIe slots: from 1GbE to 100GbE

Power

redundant Flexible Slot power supplies, Titanium efficiency

Ready-made builds from the catalog

  • DL380 Gen11 8SFF — price on request. A compact cage for eight 2.5-inch drives: a cluster node when data resides on an external storage system.
  • DL380 Gen11 16SFF and DL380 Gen11 24SFF — price on request. Dense drive configurations for local storage, hyperconvergence and databases on NVMe.
  • DL380 Gen11 8LFF — price on request. A cage for 3.5-inch drives: file server, backup repository, video surveillance.
  • DL380 Gen11 base platform — 49,000,000 UZS. Configured for the task with processors, memory and drives.

The full list of configurations with prices is in the selection HPE ProLiant Gen11, and drives and controllers for them are in the selection drives and RAID controllers.

What tasks to choose it for

Virtualization. The main scenario. Two sockets with a high core count and 32 DDR5 slots provide consolidation headroom: dozens of virtual machines fit comfortably on one node. For a cluster, calculate resources with a reserve for node failure (N+1), and check the core count against licensing minimums — for VMware this is 16 cores per processor.

Databases. DDR5 and NVMe bandwidth directly affects response time. For a heavily loaded DBMS, it makes sense to build a configuration with NVMe bays and populate all memory channels — underpopulated channels cut performance more than it seems.

Hyperconvergence and SDS. The DL380 Gen11 is a typical node for software-defined storage. What matters here is a controller in HBA mode (pass-through), not RAID: Ceph, vSAN and ZFS manage redundancy themselves.

File server and backup. For such tasks it is often excessive: look at the DL360 Gen11 or DL320 Gen11 — you will save on the chassis and licenses without losing the functionality you need. The difference between 1U and 2U is covered in a separate comparison.

What to pay attention to when ordering

  • Memory channels. Install modules symmetrically across all channels of both processors. A “lots of memory in two slots” configuration runs slower than the same capacity spread across all channels.
  • Backplane. The type of drive cage is determined at the ordering stage. Converting a SAS/SATA configuration to NVMe later means replacing the cage and cable kit, which is more expensive than planning for it from the start.
  • Thermal envelope. High-end processors require a configuration with enhanced cooling and, accordingly, different heatsinks and fans. This also affects rack power consumption: the room checklist is in the article server room in the office.
  • Network adapter. It is better to use the OCP slot than a full-size PCIe slot — you keep slots free for GPUs or additional controllers. Which adapters and transceivers work together is covered here.
  • iLO Advanced license. The remote graphical console and image mounting are licensed separately and are purchased together with the server.

Gen10 Plus, Gen11 or Gen12

The previous generation, DL380 Gen10 Plus, is a mature platform on DDR4 and PCIe Gen4, sensible for expanding an existing fleet where node uniformity matters. Gen12 on Xeon 6 processors makes sense where very high core density, EDSFF drives and a long life cycle are needed. For typical mid-sized business virtualization, Gen11 remains the balance point between price and capabilities.

Summary

The DL380 Gen11 is the default choice when you need a versatile dual-socket server with a long operating horizon. If the task is narrow — one service on a single-processor machine — the platform will be excessive, and it is more sensible to take the DL320 Gen11 or DL360 Gen11.

To select a configuration for your task and calculate the cost together with licenses — write to us. We work with new and refurbished equipment: when the latter option is justifiedis covered separately.

Questions and answers

How much does the HPE ProLiant DL380 Gen11 cost in Tashkent?

The price of ready-made builds in the catalog (8LFF, 8SFF, 16SFF and 24SFF) is on request; the base platform for a custom build is 49,000,000 UZS. The final price is determined by the processors, memory capacity and drives, so the configuration is calculated for the specific task.

Can memory and processors be moved over from Gen10?

No. Gen10 runs on DDR4 and the LGA3647 socket, Gen11 on DDR5 and LGA4677. Usually only SAS and SATA drives (with new drive trays) and some expansion cards, if they are on the compatibility list, carry over.

How does the DL380 Gen11 differ from the DL360 Gen11?

The processors, memory and chipset are the same; the difference is the chassis height: 2U versus 1U. The DL380 has up to 24 SFF bays, more PCIe slots and room for full-size GPUs; the DL360 is denser in the rack and cheaper where data resides on an external storage system.

Is a RAID controller needed, or is an HBA enough?

For classic virtualization with local drives, a controller with cache and battery is used. For software-defined storage — Ceph, vSAN, ZFS — HBA mode with direct access to the drives is needed; hardware RAID gets in the way there. For NVMe configurations, the controller must be tri-mode.

Related reading