Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

FortiGate: how to choose a model and get the performance right

Servix technical team · Updated

In brief. A FortiGate model is chosen by Threat Protection Throughput, not by Firewall Throughput: the difference between these datasheet lines reaches tenfold. If HTTPS decryption is planned, go by SSL Inspection Throughput and take 1.5–⁠2 times headroom over peak traffic. Also check the RJ45 and SFP+ ports, the number of sessions, IPsec performance and HA support. IPS, antivirus and web filtering subscriptions are renewed annually; logs require FortiAnalyzer, and multiple devices require FortiManager.

FortiGate is a next-generation firewall, and choosing a model here works differently from choosing a switch or a server. The number in the name says almost nothing, and the rated throughput depends on which security features are enabled. Here is how to avoid mistakes.

The main trap: which throughput to look at

The specification of any model lists several throughput values, and they differ several-fold:

  • Firewall Throughput — “bare” rule-based filtering. The largest number and the most useless one for planning.
  • IPS Throughput — with the intrusion prevention system enabled.
  • NGFW Throughput — IPS plus application control.
  • Threat Protection Throughput — the full set: IPS, antivirus, application control. This is the value to go by, because these are the features an NGFW is bought for.
  • SSL Inspection Throughput — with TLS decryption. The heaviest operation, and the most common reason a purchased device “cannot keep up.”

The difference between the first and the last line can be tenfold. A model chosen by Firewall Throughput hits its ceiling as soon as traffic inspection is enabled.

A separate note on SSL inspection

Today the overwhelming share of traffic is encrypted. Without TLS decryption, the antivirus and web filter see only the destination address — that is, they work at half strength. If you plan full protection, size the headroom specifically by SSL Inspection Throughput, and multiply the required value by at least one and a half to two times relative to current peak traffic.

Hardware acceleration

The advantage of FortiGate over software solutions is the specialized processors on the board. Processing does not fall entirely on a general-purpose CPU, which allows the device to hold its stated performance under load. In entry-level models the accelerators are simplified; in higher-end models they are full-featured. When comparing FortiGate with a firewall on a regular server, this is the key argument: where a server platform degrades when inspection is enabled, the hardware pipeline keeps working.

What to consider besides throughput

Parameter

Why it matters

Number and type of ports

Copper RJ45 and optical SFP/SFP+ — check that the physical layer matches your switches

Number of concurrent sessions

Critical with a large number of users and NAT

IPsec VPN performance

A separate figure. Relevant for branch connectivity and remote access

Number of VPN tunnels

Limited by the model. Count branches and remote employees

HA support

A cluster of two devices — mandatory at the perimeter if downtime is unacceptable

Local storage

Affects the ability to keep logs on the device itself

Logs: why one FortiGate is not enough

A firewall generates a large volume of events, and the built-in memory is enough only for a short period. For incident investigation and reporting, you need FortiAnalyzer — it receives logs, builds reports and lets you analyze an event after the fact. With a fleet of several devices, add FortiManager for centralized policy management: without it, configuring ten branches manually becomes a source of errors.

Licenses

The device itself is only part of the total cost of ownership. Security features work by subscription: IPS, antivirus, web filtering, application control, sandbox. The subscription is renewed annually, and when it expires the device continues to filter traffic by rules but stops receiving signature updates. Include renewal in the budget from the start — it is not an option but a condition for the protection to work.

Typical architecture

  • Small office: one entry-level device, a license for the basic protection set, logs stored locally or in the cloud.
  • A company with its own server room: an HA cluster of two devices at the perimeter, FortiAnalyzer for logs, FortiAP access points under unified management.
  • Distributed structure with branches: a FortiGate at each site, connectivity via IPsec or SD-WAN, centralized management through FortiManager, unified analytics in FortiAnalyzer.

We will select a model for your actual traffic profile and calculate the cost with licenses for the required term: [email protected] or Telegram.

Related collections and tools: FortiGate for the office.

Related reading