How to choose a FortiGate: comparing the 40F, 60F, 70F, 90G, 120G, 400F, 600F
Servix technical team · Updated
In brief. A FortiGate is chosen by Threat Protection throughput, not by firewall throughput: for the 40F, it is 600 Mbps versus 5 Gbps; for the 60F, 700 Mbps; for the 90G, 2.2 Gbps; for the 120G, 2.8 Gbps; for the 600F, 10.5 Gbps. A guideline by number of users: 40F up to 15–20, 60F/70F up to 50–100, 90G up to 150–250, 120G up to 300–500, 400F and 600F from 500. For HTTPS inspection, calculate by the SSL Inspection line with a 30–50% margin. The 100F and 200F models have been discontinued; their successors are the 120G and 200G.
When an office gets a 200–500 Mbps internet link, a public service, a branch network or a regulatory requirement to control traffic, an ordinary router can no longer cope. It can route packets and perform NAT, but it cannot see what exactly is inside a session: which application, which file, whether there is an exploit inside or a redirect to a phishing domain. This is exactly the task handled by NGFW firewalls — devices that analyze traffic down to the application level and make decisions based on content rather than port number. In the Fortinet lineup, this is the FortiGate family, and the main question when buying is the same for everyone: which model to choose so as not to overpay and not to hit a performance limit in a year.
Let’s look at seven current models — from the desktop 40F to the rack-mounted 600F — using the official figures from Fortinet datasheets, and show the selection logic: by link, number of users, ports and plans for SSL inspection.
What an NGFW is and what you pay for
A FortiGate is two things in one enclosure: a hardware platform and a subscription to security services. The hardware itself (FortiOS) can do a lot out of the box: firewall policies, NAT, routing, IPsec and SSL VPN, SD-WAN with link balancing and failover, HA clustering, VDOMs (virtual firewalls inside one box), and management of access points and switches via FortiLink.
Subscriptions add the actual “security”:
- IPS — an intrusion prevention system: signature-based and behavioral analysis, blocking of exploits and scans.
- Antivirus — in-stream file scanning, integration with the FortiSandbox sandbox.
- Web Filtering and DNS Filter — website categories, blocking of malicious and unwanted resources, control by time and user group.
- Application Control — recognition of thousands of applications (messengers, torrents, cloud drives, remote access) and policies for them, regardless of port.
- SSL/TLS inspection — HTTPS decryption, without which all of the checks above see only an encrypted stream.
Commercially, this is packaged as FortiCare (technical support, RMA, access to firmware updates) and FortiGuard (signatures and reputation databases). Usually a bundle is purchased: UTP (the basic set of UTM profiles) or Enterprise/ATP (with additional FortiGuard services; Fortinet SOC services are not included in the bundles and are purchased separately) for 1, 3 or 5 years. It is important to understand that without an active subscription, the device continues to work as a firewall and VPN gateway, but the databases stop being updated, and protection degrades within weeks. That is why the subscription term is part of the model decision, not a separate line on the invoice.
Model comparison
The table shows data from official Fortinet datasheets. Note the gap between the “bare” firewall and Threat Protection mode (IPS + antivirus + application control with logging): this is the real processor load that needs to be factored into the calculation.
Model | Firewall | NGFW / Threat Protection | Interfaces | Form factor | Who it is for |
|---|---|---|---|---|---|
5 Gbps | 800 Mbps / 600 Mbps | 5× GE RJ45 (1 WAN, 3 internal, 1 FortiLink) | desktop | Small office, remote SD-WAN site | |
10 Gbps | 1 Gbps / 700 Mbps | 10× GE RJ45 (2 WAN, 1 DMZ, 5 internal, 2 FortiLink) | desktop, fanless | Mainstream model for offices and branches | |
10 Gbps | 1 Gbps / 800 Mbps | 10× GE RJ45 (2 WAN, 1 DMZ, 5 internal, 2 FortiLink) | desktop, fanless | Branch with a large number of sessions (1.5 million) and policies | |
28 Gbps | 2.5 Gbps / 2.2 Gbps | 8× GE RJ45, 2× shared-media WAN 10G/5G/2.5G RJ45 or 10GE SFP+ | desktop | Branch with a 10G link and multi-gigabit IPsec | |
39 Gbps | 3.1 Gbps / 2.8 Gbps | 18× GE RJ45, 8× GE SFP, 4× 10GE SFP+ | 1U rack | Midsize business, SD-Branch, replacement for the 100F | |
79.5 Gbps | 10 Gbps / 9 Gbps | 18× GE RJ45, 8× GE SFP, 8× 10GE SFP+ (4 Ultra Low Latency) | 1U rack | Large campus, data center perimeter, up to 25 VDOMs | |
139 Gbps | 11.5 Gbps / 10.5 Gbps | 18× GE RJ45, 8× GE SFP, 4× 10GE SFP+, 4× 25GE SFP28 | 1U rack | Enterprise network core and data center, up to 50 VDOMs |
SSL inspection and IPsec deserve separate attention — this is where the gap between generations is most noticeable. SSL inspection: 310 Mbps for the 40F, 630 Mbps for the 60F, 700 Mbps for the 70F, 2.6 Gbps for the 90G, 3 Gbps for the 120G, 8 Gbps for the 400F and 9 Gbps for the 600F. IPsec VPN: 4.4 Gbps for the 40F, 6.5 Gbps for the 60F, 6.1 Gbps for the 70F, 25 Gbps for the 90G, 35 Gbps for the 120G, and 55 Gbps each for the 400F and 600F. Models on the new SP5 ASIC (90G, 120G) deliver a multiple increase specifically in encryption, with power consumption of about 20 and 40 W, respectively.
How to choose for your network
Step 1. Start from Threat Protection, not Firewall. The “5 Gbps firewall” figure for the 40F is pure routing without inspection. As soon as you enable IPS, antivirus and web filtering, 600 Mbps remains. Use the Threat Protection column and treat it as the ceiling.
Step 2. Account for SSL inspection. Today 85–95% of traffic is encrypted, and without decryption an NGFW turns into an expensive router. Decryption is the heaviest operation: on the 60F it delivers 630 Mbps versus 10 Gbps in firewall mode, that is, 15 times less. If you plan full HTTPS inspection, calculate by the SSL Inspection line and plan for a 30–50% margin for growth and spikes.
Step 3. Relate it to the number of users. Fortinet does not officially publish a “number of users per model” — performance depends on the traffic profile, the set of enabled profiles and the logging depth. As a practical guideline that we use in projects: 40F — up to 15–20 workstations, 60F/70F — up to 50–100, 90G — up to 150–250, 120G — up to 300–500, 400F and 600F — from 500 and up, or at the data center perimeter. These figures are not from the datasheet: they must be verified by calculation based on the actual bandwidth and load profile.
Step 4. Count the ports. Desktop models (40F, 60F, 70F, 90G) provide only copper gigabit ports; the 90G adds two 10G/SFP+ ports for WAN. The rack-mounted 120G, 400F and 600F provide SFP+ and SFP28 for fiber and stacking. An important nuance: base FortiGate models do not have PoE — PoE versions are separate SKUs. To power cameras and access points, plan for FortiSwitch switches , especially since all the models listed have a FortiLink port, which lets you manage switches and access points from the FortiGate interface itself.
Step 5. Decide on fault tolerance. If perimeter downtime is unacceptable, plan for an HA pair (FGCP) of two identical devices: active-passive or active-active. This doubles the cost of hardware and licenses but provides failover within seconds. Consider power as well: the 40F–90G use an external 12 V adapter (the 90G allows a second one for redundancy), the 120G has two built-in power supplies without hot swap, and the 400F and 600F have two hot-swappable power supplies, which is essential for a data center rack.
About discontinued models
Two models that people still often ask about are already leaving the market. FortiGate 100F (20 Gbps firewall, 1 Gbps Threat Protection) is no longer listed in Fortinet’s current product matrix, and its datasheet has been removed from the manufacturer’s website — the status is End-of-Sale. The direct successor is the 120G: almost twice the firewall throughput (39 versus 20 Gbps), three times the Threat Protection throughput (2.8 versus 1 Gbps), three gigabits of SSL inspection versus one — with power consumption of about 40 W.
Similarly, the FortiGate 200F (27 Gbps firewall, 3 Gbps Threat Protection, 4 Gbps SSL) is absent from the current matrix; its place is taken by the 200G. If you already have a 100F or 200F, there is no need to panic: support and updates under active FortiCare contracts continue until the announced End-of-Support date. But when expanding your fleet and planning the budget for the next cycle, plan for the G series — otherwise in two or three years you will end up with a zoo of platforms from different generations with different performance on identical policies.
Related collections and tools: FortiGate for the office.
Questions and answers
Can you choose a model with just enough performance and buy licenses later?
Licenses expand functionality, not performance: the hardware platform is fixed. If the 60F delivers 700 Mbps of Threat Protection, no subscription will turn it into a gigabit. The only way to grow is to replace the device. That is why performance headroom is built in at the purchasing stage, usually for a horizon of 3–5 years, together with the subscription term.
What happens if you do not renew FortiCare and FortiGuard?
The device will continue to work: policies, NAT, VPN and routing will remain. The IPS, antivirus and web filtering databases will stop being updated, and access to new firmware and to factory support with hardware replacement will be lost. In practice, this means that within a few months your NGFW will not know about new vulnerabilities, and an RMA in case of hardware failure will have to be paid for separately.
Is a separate FortiGate needed for a branch, or is a VPN to the head office enough?
The centralized option with a tunnel to the central gateway works, but all branch traffic goes through the main link, and if that link fails, the site is left without internet and without protection. A local 40F or 60F with SD-WAN provides local breakout, link redundancy and unified policies via FortiManager. In terms of license costs, the difference is small, but in terms of availability, it is fundamental.
Choosing a FortiGate is not picking a line in a price list but a calculation: actual bandwidth, the share of HTTPS to be inspected, the number of sites, fault tolerance requirements and the planning horizon. Servix specialists will select the model and license set for your network, calculate an HA pair, help with migration from the 100F/200F to the G series and take care of deployment — from basic policy configuration to SD-WAN between branches and integration with the Wi-Fi infrastructure. Write or call: +998 92 182 1144, [email protected] or Telegram — we will prepare a specification and a quote.
Related reading
FortiGate F or G series: what to choose in 2026
How FortiGate G differs from F: SP5 processor, 1.6–2.8 times higher Threat Protection, faster SSL inspection, 10G ports. Comparison of pairs and prices as of November 2026.
FortiGate: how to choose a model and get the performance right
Which throughput to look at in the FortiGate specification, why SSL inspection is needed, what hardware acceleration provides, how to calculate licenses. Choosing a model for the task.
FortiGuard licenses for FortiGate: what is included, what happens without a subscription, how to renew
FortiGate license in 2026: what FortiGuard ATP, UTP and Enterprise include, what turns off without a subscription, how to renew for 1–5 years and what co-term is.
NGFW or a conventional firewall: what to choose and what the law requires
How an NGFW differs from a classic firewall, what SSL inspection costs, and which data protection requirements apply in Uzbekistan in 2026.



