Office switch with 24 and 48 ports: Cisco 9200 and C1000, Aruba 1930, FortiSwitch
Servix technical team · Updated
In brief. For an office with up to 25 workstations, a 24-port switch with SFP+ uplinks is enough; 30–50 workstations need 48 ports; beyond that, several 48-port switches with 10G aggregation. The cheapest option is the HPE Aruba Instant On 1930: 24G for 5,500,000 UZS, 48G for 10,000,000 UZS. The Cisco C1000-48T costs 22,900,000 UZS, the Catalyst 9200L-24T 25,000,000 UZS, the FortiSwitch 124E 8,900,000 UZS. Phones and access points need a PoE model with a budget from 370 W.
How many ports and what PoE budget does an office with 20, 50 and 100 workstations need?
Count not people but devices with an RJ-45 connector: a computer, an IP phone (if it is not connected through the phone's PC port), an access point, a camera, a printer, a server, an uplink to the firewall. Add a 20–25% margin: a switch lasts 7–10 years, and the office grows during that time.
The same logic applies to PoE. Guidelines: IP phone — 4–7 W, Wi-Fi 6 access point — 13–25 W, Wi-Fi 6E with all radios — up to 30 W, IP camera — 6–12 W, PTZ camera with heater — up to 30 W. The PoE budget is shared across all ports: 370 W on 48 ports is 7.7 W per port at full load. What matters is the total wattage, not the number of PoE ports.
- 20 workstations. About 30 ports: one 48-port switch, or a 24-port one plus an 8-port one in the meeting room. PoE: 20 phones at 6 W, 3 access points at 20 W, 4 cameras at 10 W — about 220 W; a 370 W model covers this with a margin.
- 50 workstations. 60–70 ports: two 48-port switches, or 48 plus 24. PoE about 500 W — one 48-port switch with 740 W or two with 370 W, with phones and access points distributed between them.
- 100 workstations. 3–4 switches with 48 ports each on the floors and an aggregation layer with 10G ports for uplinks and servers. PoE about 1 kW in total, distributed across the access switches.
How do Cisco, Aruba and FortiSwitch compare on ports, PoE and price?
The table lists models from the servix.uz switches section with prices at the time of publication. All are managed, with gigabit copper ports and SFP or SFP+ uplinks.
Model | Ports | PoE | Uplink | Management | Catalog price |
|---|---|---|---|---|---|
24×1G | no | 4×SFP/SFP+ 1/10G | Instant On cloud, web | 5,500,000 UZS | |
48×1G | no | 4×SFP/SFP+ 1/10G | Instant On cloud, web | 10,000,000 UZS | |
48×1G PoE+ | 370 W | 4×SFP/SFP+ 1/10G | Instant On cloud, web | 19,000,000 UZS | |
24×1G | no | 4×SFP 1G | FortiLink or standalone | 8,900,000 UZS | |
24×1G | no | 4×SFP+ 10G | FortiLink or standalone | 12,700,000 UZS | |
24×1G PoE+ | 370 W | 4×SFP 1G | FortiLink or standalone | 17,500,000 UZS | |
FortiSwitch FS-124F-FPOE | 24×1G PoE+ | 370 W | 4×SFP+ 10G | FortiLink or standalone | price on request |
48×1G | no | 4×SFP+ 10G | FortiLink or standalone | 19,000,000 UZS | |
48×1G PoE+ | 740 W | 4×SFP+ 10G | FortiLink or standalone | 33,880,000 UZS | |
48×1G | no | 4×SFP+ 10G | IOS CLI, web; no subscription | 22,900,000 UZS | |
24×1G | no | 4×SFP+ 10G | IOS XE CLI, Catalyst Center; DNA subscription | 25,000,000 UZS |
A spread of more than four times for the same number of ports reflects differences in L3 features, stacking and management method, not a markup for the logo.
When is the HPE Aruba Instant On 1930 enough?
For most offices with up to 50–70 workstations, it is enough. The Aruba Instant On 1930 switch is HPE's line for small and medium businesses: a 24-port HP switch with four SFP/SFP+ ports, a full set of L2 features (VLAN, LACP, ACL, voice QoS, loop protection) and static routing between VLANs. It is managed from the Instant On cloud portal or mobile app without a subscription; those who don't want the cloud can enable the local web interface. Instant On access points live in the same portal, so the entire office network, including Wi-Fi, is configured from a single window — more in the article on Aruba Instant On for office Wi-Fi. The 1930 has no stacking: each switch is a separate device in a shared cloud site.
HP switch prices in the catalog: 1930 24G — 5,500,000 UZS, 1930 48G — 10,000,000 UZS, 48G PoE with 370 W — 19,000,000 UZS. There is a 24-port PoE version with a 195 or 370 W budget (JL683B and JL684B) and eight-port models for an office room or meeting room: 1930 8G for 2,700,000 UZS and 8G PoE for 6,300,000 UZS. The section is HPE Aruba switches, the whole brand is HPE Aruba. The next step up, with multigigabit ports and full L3, is the Aruba CX 6300 for 185,000,000 UZS, but that is already a network core.
What do you pay for in the Cisco Catalyst 9200 and C1000?
Cisco C1000-48T-4X-L — the successor to the Catalyst 2960-L: 48 gigabit ports, 4 SFP+ 10G uplinks, L2 with static routing, classic IOS with the familiar CLI. No subscription, and no stacking either. This is the choice for companies that already have a Cisco fleet and configuration templates. The price of this 48-port Cisco switch is 22,900,000 UZS.
Cisco Catalyst 9200L-24T-4X-A — the Catalyst 9000 platform on IOS XE. The “-A” suffix means a Network Advantage license: dynamic routing, VRF, PBR, advanced telemetry. StackWise-80 combines up to 8 switches into one logical device with a shared configuration and LACP across different chassis. A new 9200 always comes with a mandatory Cisco DNA subscription (Essentials or Advantage) for 3, 5 or 7 years — it unlocks Catalyst Center, analytics and SD-Access; after it expires, the switch continues to run on the perpetual Network license. IOS XE updates and TAC cases require a service contract.
Buying a Cisco switch makes sense when there are requirements that Instant On will not cover: multiple VRFs, a stack per floor, SD-Access, unified operations with Cisco in the data center. The 24-port Cisco 9200L switch costs 25,000,000 UZS; the section is Cisco switches.
When to choose FortiSwitch if you already have a FortiGate?
If the perimeter is protected by a FortiGate, FortiSwitch is the most logical choice for the access layer. Through FortiLink, the firewall manages the switches as its own ports: VLANs, policies, 802.1X and NAC are configured in a single FortiOS console, and Security Fabric automatically isolates a compromised host on its port. The number of managed switches depends on the FortiGate model — check the FortiOS limits table before buying. How to choose the firewall itself is covered in the article on choosing a FortiGate.
Without a FortiGate, FortiSwitch also works — standalone, via the web interface and CLI, but without the main advantage. The 1xx line in the catalog: FS-124E with gigabit SFP for 8,900,000 UZS and FS-124F with 10G SFP+ for 12,700,000 UZS; PoE with 370 W — FS-124E-FPOE for 17,500,000 UZS and FS-124F-FPOE (price on request); 48 ports — FS-148F for 19,000,000 UZS and FS-148F-FPOE with a 740 W budget for 33,880,000 UZS. The vendor's products are in the Fortinetsection, firewalls are in NGFW.
Managed or unmanaged, L2 or L3, do you need stacking?
An unmanaged switch should not be installed in an office with 20 or more workstations: without VLANs you cannot separate guest Wi-Fi from accounting or telephony from cameras, and in case of a failure there are neither port statistics nor traffic mirroring.
L2 or L3. For an access switch, L2 with static routing is enough if the FortiGate routes between VLANs. This is the typical scheme for up to 100 workstations, and the Aruba 1930, Cisco C1000 and FortiSwitch 1xx fit it. Full L3 is needed when heavy traffic flows between VLANs — backup, video surveillance, storage — and routing it through the firewall is undesirable. In that case a Catalyst 9200 or Aruba CX is installed at the aggregation layer.
Stacking among those listed is offered only by the Catalyst 9200L: one configuration and one management address for several chassis, link aggregation across two devices, node replacement without rewriting settings. The Aruba 1930 compensates with a shared cloud site, FortiSwitch with management through the FortiGate.
Not to be confused: the HPE SN6600B is a 32 Gbps Fibre Channel switch for SAN; it has nothing to do with the office network.
What else to buy along with a switch?
- SFP+ transceivers and DAC cables. For uplinks up to 300 m over multimode — 10GBase-SR, up to 10 km over single-mode — 10GBase-LR; within a rack, 1–5 m DAC cables are cheaper. Cisco is stricter about third-party modules; Aruba and FortiSwitch work with compatible ones. More in the article on network adapters and transceivers.
- 10G network adapters for servers, so that the SFP+ uplink is not limited by a gigabit port: section network adapters.
- Patch panels, cable organizers, Cat6 patch cords — other components.
- UPS. A 740 W PoE switch under load draws about 900 W from the outlet; a 1500 VA UPS is the minimum for telephony and cameras to survive a power outage.
- Access points. Their number and class determine the PoE budget; which ones to choose is covered in the article Wi-Fi 6 or 6E for the office, the catalog is wireless equipment.
What about warranty and delivery in Tashkent?
For the Aruba Instant On 1930, HPE states a lifetime hardware warranty with device replacement. For the Cisco C1000 and Catalyst 9200 — Enhanced Limited Lifetime Warranty on hardware; software updates and TAC are under a service contract. For FortiSwitch, the vendor covers the hardware under warranty; technical support and advanced replacement are under a FortiCare contract. The status is checked by serial number on the manufacturer's portal; whether such a warranty applies in Uzbekistan depends on the supply channel. Servix gives a 12-month warranty on all equipment and handles warranty service in-house.
Items are supplied made to order within 2–3 weeks, and the price is fixed in the invoice — confirm the lead time for a specific model before including it in a project. Contract and payment in UZS, by bank transfer for companies. Send us an office plan with the number of workstations, phones and access points via the form on the website or by phone +998 92 182 11 44 — we will send back a calculation of ports and PoE and an estimate for two or three options.
Related roundups and tools: Aruba Instant On for the office, PoE calculator.
Questions and answers
How does an HP switch differ from Aruba?
It doesn't — it is the same company. After acquiring Aruba in 2015, HP's networking division operates as HPE Aruba Networking, so an “HP switch” in the catalog is an Aruba Instant On or Aruba CX.
Does the Cisco C1000 need a subscription?
No. The C1000 works without Cisco DNA and mandatory subscriptions — this is how it differs from the Catalyst 9200, where the subscription is included in the initial purchase. A support contract is optional, but without it there is no access to TAC.
Will FortiSwitch work without a FortiGate?
Yes, standalone via its own web interface or CLI, like a regular managed switch. FortiLink is enabled later, when a FortiGate appears — the switch then comes under its management.
Is one 48-port switch enough for an office of 50 people?
Usually not: computers, phones, access points, cameras, printers and uplinks add up to 60–70 ports. The standard option is 48 plus 24 ports or two 48-port switches with PoE devices distributed between them.
Related reading
How to choose an SFP module for a Cisco, HPE Aruba, Huawei or Juniper switch
Choosing SFP, SFP+, SFP28 and QSFP28 for Cisco, HPE Aruba, Huawei and Juniper: part number, standard, transmission distance, fiber, BiDi, flashing and a table of Fibreon compatible equivalents.
HPE Aruba Instant On: enterprise Wi-Fi without a controller
HPE Aruba Instant On access points: deployment without a controller, guest network, PoE, calculating the number of access points. Where the solution fits and where the higher-end lineup is needed.
Wi-Fi 6 or Wi-Fi 6E for the office: what to choose and how many access points you need
How Wi-Fi 6E differs from Wi-Fi 6, how many access points an office needs, what to consider regarding PoE and the 6 GHz band in Uzbekistan. A breakdown of Aruba Instant On and FortiAP models.
Wi-Fi in a warehouse: racks, metal and data collection terminals
How to cover a warehouse with Wi-Fi: planning by aisles rather than by area, access point mounting height, roaming for data collection terminals, outdoor zones and PoE.



