Skip to content

Dear customers! Please send orders and inquiries to [email protected] or to Telegram @servix_uz instead of calling by phone: due to the high workload, the operator cannot answer all incoming calls.

Servix

HPE ProLiant Gen10

HPE ProLiant DL380 Gen10 — configurations and prices

Dual-socket 2U: up to 30 2.5″ drives or 19 3.5″ drives.

Ready-made configurations from 33,737,000 UZS · platform from 38,000,000 UZS

HPE DL380 Gen10 8SFF Server (1×Xeon Gold 5120, 256GB)

At a glance.

2U

Chassisrack

2 sockets

Processors1st/2nd Gen Intel Xeon Scalable

3 TB

Memory, maximumDDR4, 24 slots

up to 12 LFF

Drive baysor 24 SFF

iLO 5

Remote management

About the DL380 Gen10

HPE ProLiant DL380 Gen10 is a dual-socket 2U rack server by HPE (Gen10). Remote management: iLO 5.

Servix offers 11 DL380 Gen10 configurations: 10 pre-configured builds and a platform built to your specification. Prices: 33,737,000 UZS to 54,457,000 UZS; 10 of 11 refurbished, the rest new. Made to order in 2–⁠3 weeks; price and lead time are confirmed in an invoice with 12 % VAT.

More models in HPE ProLiant servers; by use case: Server for 1C, Virtualization server.

Inside the ready-made configurations

Ready-made DL380 Gen10 builds differ in processors, memory capacity, RAID controller and drive cage.

The DL380 Gen10 platform is built to your specification: processors, memory, controller and drives are selected separately. Platform price: from 38,000,000 UZS; variants: “I want it cheaper, it will be slightly used” — 38,000,000 UZS, “New” — 50,000,000 UZS.

  • Processors: 1× Xeon Silver 4210R, 2× Xeon Silver 4210, 2× Xeon Silver 4215R, 1× Xeon Gold 5120, 2× Xeon Silver 4208 (8–⁠14 cores per processor).
  • RAM: 32 GB to 256 GB, DDR4 RDIMM.
  • Drive cage: 8 SFF — 9 builds, 12 LFF — 1 build.
  • Drives: none in the ready-made builds (noHDD); the bays are free for your drives.
  • RAID controller: HP P408i-a, HPE P816i, HPE P408i.
  • Power supplies: 1× 800 W, 2× 500 W, 2× 800 W, 1× 500 W.
  • Networking: 4 port 1Gb/s RJ-45, 2 port 1Gb/s.

DL380 Gen10 specifications

Form factor
2U rack, 2 sockets
Processors
up to 2× Intel Xeon Scalable 1st/2nd generation (Bronze/Silver/Gold/Platinum), up to 28 cores per CPU
Memory
24× DDR4, up to 2933 MT/s, max. 3 TB
Drive bays
up to 24× SFF (2.5") or up to 12× LFF (3.5"), NVMe support; optional rear bays
Controllers
HPE Smart Array (Gen10), NVMe/SAS/SATA support
Networking
FlexibleLOM/embedded 4×1GbE, optional 10/25GbE
Management
HPE iLO 5

DL380 Gen10 configurations and prices

The platform (first row) and 10 pre-configured builds, by price. Click a configuration for its specifications and cart. All items are made to order, 2–⁠3 weeks.

ConfigurationProcessorMemoryConditionPrice
Platformconfigurableconfigurableto your specificationfrom 38,000,000 UZS
8 SFF1× Xeon Silver 4210R32 GB DDR4Refurbished33,737,000 UZS
12 LFF2× Xeon Silver 421032 GB DDR4Refurbished36,037,000 UZS
8 SFF2× Xeon Silver 4215R128 GB DDR4Refurbished45,761,000 UZS
8 SFF1× Xeon Gold 5120256 GB DDR4Refurbished54,457,000 UZS
8 SFF2× Xeon Silver 421032 GB DDR4RefurbishedOn request
8 SFF2× Xeon Silver 4215R32 GB DDR4RefurbishedOn request
8 SFF2× Xeon Silver 420832 GB DDR4RefurbishedOn request
8 SFF2× Xeon Silver 421064 GB DDR4RefurbishedOn request
8 SFF2× Xeon Silver 4215R64 GB DDR4RefurbishedOn request
8 SFF2× Xeon Silver 420864 GB DDR4RefurbishedOn request

Choosing your DL380 Gen10 configuration

SFF or LFF? SFF: 2.5″ bays, more drives per chassis, SSDs and fast SAS drives for databases and virtualization. LFF: 3.5″ bays, high-capacity HDDs for file storage, archives and backups.

Single-processor builds cost less; dual-processor builds offer more cores for virtualization and databases.

Ready-made builds have 32 GB to 256 GB of memory; the platform takes up to 3 TB, so memory can be added later.

The catalog has both new and refurbished builds. Condition is shown in the table and product pages; warranty: 12 months, serviced by Servix.

Need another configuration? Click “Request a quote”: we will match processors, memory and drives to your workload and send a proposal.

DL380 Gen10 and related models

Differences based on catalog data:

  • HPE ProLiant DL360 Gen10: chassis 1U vs 2U; 9 configurations from 25,043,000 UZS.
  • HPE ProLiant DL365 Gen11: chassis 1U vs 2U, generation Gen11 vs Gen10, memory up to 6 TB vs up to 3 TB, management iLO 6 vs iLO 5; 1 configuration from 48,000,000 UZS.

How to order

Order from the table via the cart or click “Request a quote”: a manager confirms the configuration, price and lead time.

Payment by bank transfer, invoice with 12 % VAT. Free delivery in Tashkent; other regions of Uzbekistan are billed by address and weight as a separate invoice line. Installation and support: integration partner KP Solutions.

HPE ProLiant DL380 Gen10 overview: what workloads it suits and how to choose a configuration

The DL380 Gen10 is a dual-processor 2U server on 1st and 2nd Gen Xeon Scalable. HPE has moved the QuickSpecs for this model to the archive (RETIRED) and no longer produces new units, so today the DL380 Gen10 is mostly bought refurbished. Below is what is not visible in the configuration table: where the model fits, which platform restrictions affect the build, and what to check on acceptance. The comparison with Gen11 in processors, memory, bus and support timelines is in a separate article "DL380 Gen10 or Gen11: which to choose"; we do not repeat it here.

Where the DL380 Gen10 fits

  • 1C and medium-sized databases. Two processors, 24 memory slots and SSDs in RAID 10 are a sufficient basis for 1C with MS SQL or PostgreSQL. Sizing by number of users is on the page "Server for 1C".
  • Virtualization on Hyper-V or Proxmox VE. Be more careful with VMware: according to the Broadcom knowledge base, Cascade Lake (2nd Gen Xeon Scalable) and Skylake-SP (1st Gen) processors work in VCF 9.x only in Deprecated mode, and support is not extended beyond the 9.x branch.
  • File server, backups, video archive. The 12LFF chassis with a mid-chassis 4 LFF cage and rear bays holds up to 19 3.5″ drives plus 2 more 2.5″ drives. An example of an entry-level build is DL380 Gen10 12LFF with P816i-a; other options are in the selection "File server and backup server".

For a single light service — a domain controller, monitoring, a small web server — a 2U chassis is overkill; 1U is enough. The DL380 Gen10 falls short where a fast NVMe pool, 100GbE networking or GPUs are needed: the PCIe 3.0 bus holds all of these back.

The platform according to HPE documentation

Processors. Up to two 1st Gen (x1xx) or 2nd Gen (x2xx) Xeon Scalable processors, maximum 28 cores, TDP up to 205 W (Platinum 8280, Gold 6258R). The second processor must be the same model. HPE ships processors from 130 W with a high-performance heatsink: when replacing the Silver 4210 (85 W) with a Gold 6226R (150 W), check the heatsink too.

Memory. 24 DDR4 slots, 12 per processor, 6 channels. RDIMM or LRDIMM can be installed, but not mixed. The 3 TB ceiling (24 × 128 GB LRDIMM) is achievable only with M and L series processors. Regular 2nd Gen Silver and Gold processors address up to 1 TB per socket, 1st Gen up to 768 GB. A build on two Silver 4215R has a real limit of 2 TB, a single-processor build on a Gold 5120 — 768 GB.

Drives. The base 8SFF chassis is expanded with additional cages to 16 and 24 SFF; for an on-site upgrade to 24 SFF, HPE requires a high-performance fan kit and recommends installing the cages in order: Box 2 first, Box 1 last. The 24SFF chassis with a rear cage gives 30 SFF bays. In 12LFF, the rear 3 LFF cage takes the place of the second and third risers, leaving only the three slots of the primary riser for expansion cards. NVMe cages are installed only in SFF chassis.

OS boot. The system does not have to be kept in the front bays: the primary riser has room for two M.2 drives (mirrored with software RAID), and the NS204i-p board carries two 480 GB NVMe M.2 drives in hardware RAID 1.

RAID. P408i-a — 8 internal SAS lanes and 2 GB cache, P816i-a — 16 lanes and 4 GB, E208i-a — 8 lanes without cache. Smart Array controllers work only with drives in Smart Carrier trays. Models and modes are in the RAID controller reference guide.

Networking, power, management. All chassis have a FlexibleLOM slot; some models have built-in 4 × 1GbE. Modules for it were produced in 10GbE (SFP+ and RJ-45) and 10/25GbE SFP28 (Broadcom BCM57414, Mellanox MCX4121A) versions; the PCIe slots remain free. Flex Slot power supplies: 500 W, 800 W or 1600 W; HPE does not allow installing power supplies of different models in one server. Management — iLO 5 with a dedicated 1 Gbps port.

DL380 Gen10 alongside its neighbors

Parameter

DL360 Gen10

DL380 Gen10

DL380 Gen10 Plus

Chassis

1U

2U

2U

Processors

1st and 2nd Gen Xeon Scalable, up to 28 cores

1st and 2nd Gen Xeon Scalable, up to 28 cores

3rd generation Xeon Scalable, up to 40 cores

Memory

24 DDR4 slots, up to 3 TB

24 DDR4 slots, up to 3 TB

32 DDR4-3200 slots, up to 8 TB

Drives, maximum

10 SFF or 4 LFF, plus 1 SFF rear

30 SFF or 19 LFF + 2 SFF

38 SFF or 20 LFF

Expansion slots

up to 3 × PCIe 3.0

up to 8 × PCIe 3.0

up to 8 × PCIe 4.0

Networking

4 × 1GbE (depending on model) and FlexibleLOM

4 × 1GbE (depending on model) and FlexibleLOM

none built in; OCP 3.0 or PCIe

DL360 Gen10 — the same platform in 1U: the processors and memory are the same, with fewer drives and slots. It is chosen when data is on a storage system and only a system drive is needed locally — see the DL360 Gen10 lineup. The DL380 Gen10 is needed when data is stored inside the server or more than three expansion cards are required.

DL380 Gen10 Plus was released by HPE between Gen10 and Gen11 on 3rd Gen Xeon: PCIe 4.0, eight memory channels, networking only via OCP or PCIe cards. It has its own board and socket; 1st and 2nd Gen processors do not carry over to it.

Dell PowerEdge R740 — a contemporary of the DL380 Gen10. According to Dell's specification (2020 revision), it is designed for two 2nd Gen Xeon Scalable processors with up to 28 cores and 24 DDR4 slots up to 3 TB, but at the front it holds up to 16 2.5″ drives or 8 3.5″ drives versus 24 and 12 on the DL380 Gen10. Management — iDRAC9, controllers — PERC. Choose based on which fleet you already maintain; see the R740 lineup.

How to build a configuration for the task

Cores and licenses. Windows Server is licensed per core: a minimum of 8 licenses per processor and 16 per server. Two 8-core Silver 4208 or 4215R processors cover exactly this minimum. VMware vSphere has a different minimum — 16 cores per processor, so a server with two 8-core processors is paid for as a 32-core one. For VMware, the 16-core Gold 5218 (2.3 GHz, 125 W) or Gold 6226R (2.9 GHz, 150 W) make more sense. For Hyper-V, the edition also matters: Windows Server Standard with all cores licensed gives the right to two virtual machines, each next two require a new set of licenses for all cores, and Datacenter removes the limit on the number of VMs.

Memory. Install modules equally on both processors and of the same size. 64 GB RDIMMs give up to 1.5 TB; more is possible only with LRDIMM, and above 2 TB only with M or L processors.

Drives and RAID. For virtual machines and databases — SSDs in RAID 10, for an HDD archive — RAID 6. Calculate the usable array capacity in the RAID calculator. Move the system to M.2 or the NS204i-p so that the front bays go entirely to data.

Networking and power. For 1C and a file server in an office, the built-in 1GbE ports are enough. For a virtualization cluster and network backup, install 10/25GbE via FlexibleLOM; DAC cables or optical transceivers for it are purchased separately. You need two power supplies: then if one fails, the server keeps running. A balanced starting point is the 8SFF on two Silver 4215R with 128 GB, which already has two 800 W power supplies.

What to check on a refurbished DL380 Gen10

  • Firmware. Compare the System ROM, iLO 5 and Smart Array controller versions with the current Service Pack for ProLiant and update them before putting the server into operation.
  • iLO license. Ready-made builds list iLO 5 Standard. According to QuickSpecs, the full remote console, session recording and virtual media are provided by iLO Advanced: if the server will not be located near you, plan for this license.
  • Cache battery. The P408i-a and P816i-a require a Smart Storage Battery or a hybrid capacitor. Make sure it is installed and iLO shows no errors for it.
  • Drive trays. Builds come without drives. For your own drives you will need Smart Carrier trays, and empty bays must be covered with blanks.
  • Networking. Not all models have the built-in 4 × 1GbE: Networking Choice variants do not, and the ports are provided by a FlexibleLOM module or a PCIe network card. Check which module is installed and how many ports it has.
  • Drive wear. If drives are included, check the power-on hours and reallocated sectors in SMART, and for SSDs the remaining endurance.
  • Fans and rails. Count the fans: a dual-processor 8SFF build has six, while in a single-processor one HPE installs four. The 12LFF and 24SFF chassis come standard with six high-performance fans. Also check that rack rails are included.

The full acceptance checklist is in the article "Used server: what to check when buying". Refurbished servers carry a warranty of 12 months, serviced by Servix. Free delivery within Tashkent.

Related models.

Gen10 · 2U · 2 sockets

DL380 Gen10

Dual-socket 2U: up to 30 2.5″ drives or 19 3.5″ drives.

from 33,737,000 UZS11 configurations · 10 refurbished

Gen10 · 1U · 2 sockets

DL360 Gen10

Dual-socket 1U on 1st/2nd Gen Xeon Scalable.

from 25,043,000 UZS9 configurations · 8 refurbished

Questions and answers

What does HPE ProLiant DL380 Gen10 cost?

Ready-made configurations range from 33,737,000 UZS to 54,457,000 UZS, a platform to your specification from 38,000,000 UZS. Prices in UZS, invoice with 12 % VAT. Table prices are current; a manager confirms them when you order.

DL380 Gen10: new or refurbished?

Of 11 configurations, 10 are refurbished and 1 is new. Condition is shown in the table and product pages.

What is the DL380 Gen10 lead time?

Made to order, 2–3 weeks; the exact lead time and price are confirmed in the invoice.

What is the DL380 Gen10 warranty?

Warranty: 12 months on all equipment (new, refurbished and used), serviced by Servix.

Can the DL380 Gen10 be configured for my workload?

Yes: the DL380 Gen10 platform is built to your specification, from 38,000,000 UZS. Click “Request a quote” and describe your task.

How does DL380 Gen10 differ from DL360 Gen10?

Per catalog data (DL360 Gen10 vs DL380 Gen10): chassis 1U vs 2U.

Need a quote?

Leave a phone number or Telegram — we will send the configuration, price in UZS and lead time. Invoice with 12% VAT.

Installation and support — KP Solutions

Need more than hardware? Our integrator partner will install your servers and network, configure them and provide ongoing support.

Go to the KP Solutions website ↗