HPE ProLiant DL380 Gen10 or Gen11: which to choose — comparison of generations and prices
Servix technical team · Updated
In brief. The DL380 Gen10 is bought as an inexpensive refurbished 2U server for 1C, a file server, backup and expanding a Gen10 fleet: builds with two Xeon Silver processors and 32–128 GB of memory cost from 36,037,000 to 45,761,000 UZS in the Servix catalog (November 2026). The DL380 Gen11 is for virtualization, databases and NVMe for five years or longer: up to 64 cores per processor, eight DDR5 channels instead of six DDR4 channels, PCIe 5.0 instead of 3.0. The price of ready-made Gen11 builds is on request; they have a single-socket Xeon Bronze 3408U and 32 GB of memory, so they are upgraded for a production workload. The Gen11 platform configured to specification costs from 49,000,000 UZS. HPE has discontinued Gen10; Gen11 is on sale and receives updates.
The DL380 is the most widespread dual-socket 2U server in the HPE ProLiant lineup, and in 2026 the choice is between a refurbished Gen10 and a new Gen11. Catalog prices overlap, so the question is not “which is better” but “what is worth paying extra for.” This article is for IT managers and administrators who buy one or two servers for a specific task.
We compare using HPE QuickSpecs — DL380 Gen10 (version 77 of June 16, 2025) and DL380 Gen11 (version 47 of September 8, 2026) — and catalog listings. A detailed review of Gen11 is in the DL380 Gen11 review; what carries over from an old server is in the article on upgrading a server fleet.
Two generations in a nutshell
The first edition of the DL380 Gen10 QuickSpecs was released on July 11, 2017. The server runs on 1st and 2nd generation Xeon Scalable processors, and the document is marked RETIRED: the base models have been discontinued. Between Gen10 and Gen11 there was the DL380 Gen10 Plus on 3rd generation Xeon — a separate platform not covered here.
The DL380 Gen11 appeared in QuickSpecs on January 10, 2023 with 4th generation Xeon Scalable; HPE later added the 5th. Gen12 on Xeon 6 has already been released, but Gen11 remains a current platform.
Comparison by QuickSpecs
Parameter | DL380 Gen10 | DL380 Gen11 |
|---|---|---|
Processors | up to 2 × 1st or 2nd generation Xeon Scalable, up to 28 cores and 205 W | up to 2 × 4th or 5th generation Xeon Scalable, up to 64 cores and 385 W |
Memory | DDR4, 24 slots: 6 channels per processor, 2 modules per channel | DDR5, 32 slots: 8 channels per processor, 2 modules per channel |
Memory speed | up to 2933 MT/s on Gold 62xx and Platinum 82xx, 2400 MT/s on Silver | up to 4800 MT/s on the 4th generation, up to 5600 MT/s on higher-end 5th generation models, 4000–4400 MT/s on Silver and Bronze |
Maximum memory | 1.54 TB with RDIMM, 3 TB with LRDIMM | 8 TB (32 × 256 GB) |
Expansion slots | up to 8 × PCIe 3.0 | up to 8: 7 × PCIe 5.0 and 1 × PCIe 4.0 |
Networking | 4 × 1GbE embedded (depends on model) and a FlexibleLOM slot | no embedded networking, 2 OCP 3.0 slots |
Drive bays | 8 or 24 SFF (up to 30 with a rear cage), 8 or 12 LFF (up to 19 with mid and rear cages) | 8 or 24 SFF (up to 36 SAS drives with mid and rear cages), 8 or 12 LFF (up to 20), 12 EDSFF chassis |
NVMe | up to 20 drives in dedicated NVMe cages | U.3 tri-mode cages, up to 36 EDSFF E3.S drives |
RAID | S100i (software), E208i without cache, P408i (2 GB), P816i-a (4 GB) | Intel VROC (software), MR216i without cache, MR408i-o (4 GB), MR416i (8 GB), SR932i-p (8 GB) |
Management and TPM | iLO 5, TPM module optional | iLO 6, TPM 2.0 built in |
Flex Slot power supplies | 500, 800 and 1600 W, −48 V DC available | 800, 1000, 1600 and 1800–2200 W |
HPE status | discontinued | on sale, QuickSpecs updated in September 2026 |
Processors: 28 cores vs 64
Gen10 takes 1st generation Xeon Scalable (x1xx, for example Silver 4110 or Gold 5120) and 2nd generation (x2xx: Silver 4210, 4215R, Gold 6226R). The ceiling is 28 cores per processor and 56 per server, and each processor has 48 PCIe 3.0 lanes. Gen11 works with 4th (x4xx) and 5th (x5xx) generation Xeon: up to 60 cores on the Platinum 8490H and up to 64 on the Platinum 8592+, i.e. up to 128 cores per server.
Two caveats from QuickSpecs that matter when buying:
- The processor generation within a platform cannot be upgraded. HPE does not support replacing 1st generation Xeon with 2nd generation in Gen10, or 4th with 5th in Gen11: the firmware for the 5th generation is incompatible with a board shipped with the 4th. A Gen10 build on Silver 4110 or Gold 5120 will stay on the 1st generation.
- Processors with the U suffix are single-socket only. According to Intel ARK, the Xeon Bronze 3408U from ready-made Gen11 builds works only in single-socket systems; in QuickSpecs it has 0 UPI links for connecting to a second processor. It has 8 cores at 1.8 GHz (turbo 1.9 GHz), DDR5-4000 memory and PCIe 4.0. For a dual-socket server it is replaced with a pair of identical Silver or Gold processors.
For 1C, frequency matters more than core count. Among refurbished Gen10 servers, the best option is the Silver 4215R with a 3.2 GHz base frequency. Gen10 can be upgraded with a Xeon Gold 6226R processor (16 cores, 2.9 GHz) for 14,149,473 UZS — but only in a 2nd generation build, and both processors must be the same model; in a single-socket build, the second processor is installed with a heatsink and two additional fans. For 1C on Gen11, look at the Gold 6434 (8 cores, 3.7 GHz) or Gold 6544Y (16 cores, 3.6 GHz).
Memory: DDR4 vs DDR5
The speed is set by the processor, not the module: refurbished Gen10 servers have DDR4-2666 modules, but with Xeon Silver they run at 2400 MT/s. With one processor, half of the slots are available — 12 in Gen10 and 16 in Gen11. The theoretical peak bandwidth per processor is channels × speed × 8 bytes:
Configuration | Channels | Speed | Peak per processor |
|---|---|---|---|
Gen10, Xeon Silver 42xx | 6 | 2400 MT/s | 115.2 GB/s |
Gen10, Gold 62xx and Platinum 82xx | 6 | 2933 MT/s | 140.8 GB/s |
Gen11, Bronze 3408U | 8 | 4000 MT/s | 256 GB/s |
Gen11, 4th generation Xeon | 8 | 4800 MT/s | 307.2 GB/s |
Gen11, higher-end 5th generation Xeon | 8 | 5600 MT/s | 358.4 GB/s |
The peak is reached only if all channels are populated. Ready-made builds come with two to four modules, so for virtualization and DBMS, memory is added up to 6 or 12 modules per processor in Gen10 and up to 8 or 16 in Gen11. The 8 TB ceiling of Gen11 means 32 modules of 256 GB, but in the 24SFF chassis HPE allows no more than 16 such modules. DDR4 will not fit into DDR5 slots, so memory from old Gen10 servers will not move to Gen11.
PCIe 3.0 vs 5.0: where it shows
Both servers have up to eight slots on three risers; the second and third risers work only with the second processor. An x16 PCIe 3.0 slot gives about 15.75 GB/s in one direction, PCIe 5.0 — about 63 GB/s. The difference is visible in three cases:
- NVMe. An x4 drive on PCIe 3.0 gets about 3.9 GB/s, so a fast NVMe drive in Gen10 runs at the speed of the 3.0 bus.
- 100GbE networking. A dual-port 100GbE adapter needs up to 25 GB/s — more than PCIe 3.0 x16 provides.
- GPUs and accelerators. They are designed for PCIe 4.0 and 5.0 and lose bandwidth in a 3.0 slot.
For 1C, a file server on HDDs and 1–10GbE networking, PCIe 3.0 is more than enough. Networking is arranged differently: Gen10, depending on the model, has 4 embedded 1GbE ports and a FlexibleLOM slot, while Gen11 has no embedded networking — ports are provided by an adapter in one of the two OCP 3.0 slots or by a PCIe card.
Drives: SFF, LFF, NVMe and EDSFF
The chassis are similar: 8 or 24 SFF (2.5″) bays and 8 or 12 LFF (3.5″) bays in front, plus mid and rear cages. With them, Gen10 holds up to 30 SFF or 19 LFF drives, and Gen11 up to 36 SFF SAS drives or 20 LFF. The main difference is NVMe:
- In Gen10, NVMe drives go into dedicated cages — for 8 NVMe or for 6 SAS/SATA and 2 NVMe. The maximum is 20 NVMe drives.
- Gen11 has U.3 tri-mode cages: one bay accepts SAS, SATA and NVMe if the controller is also tri-mode. The 12 EDSFF chassis holds up to 36 E3.S NVMe drives and requires two processors.
In both generations, an 8LFF chassis cannot be converted to 12LFF on site, so the drive cage is chosen up front: 12LFF for a file archive and video surveillance, SFF with NVMe for virtualization and databases.
RAID controllers
Refurbished Gen10 servers in the catalog come with a Smart Array P408i-a (2 GB cache) or P816i-a (4 GB) — hardware controllers on which RAID 5, 6 and 10 on HDDs work properly. The embedded software S100i works only with SATA, in UEFI mode and under Windows.
Gen11 uses MegaRAID controllers under the HPE brand. Ready-made builds come with the MR216i-p: tri-mode without cache, which is used in HBA mode for ZFS, Ceph and vSAN. For RAID 5 and 6 on a large array, you need the MR408i-o (4 GB) or MR416i (8 GB). Controllers with cache in both generations need a battery or a hybrid capacitor. For the operating system there is the NS204i-u NVMe boot module, which does not occupy drive bays.
iLO 5 and iLO 6, security
In basic protection the generations are almost equal: the QuickSpecs of both list an immutable Silicon Root of Trust, firmware signature verification, firmware rollback, Secure Boot, FIPS 140-2 and Redfish API. Gen11 has TPM 2.0 built in, while on Gen10 the TPM module is optional; Gen11 controllers support SPDM — component authentication.
For the owner of a refurbished Gen10, something else matters more: since 2020, HPE has not required a warranty or contract to download the Service Pack for ProLiant and System ROM firmware for Gen10 and newer servers.
Power supplies
Both generations use hot-swap HPE Flex Slot power supplies: 500, 800 and 1600 W on Gen10; 800 W Platinum, 1000 W Titanium, 1600 W Platinum and 1800–2200 W Titanium on Gen11. Ready-made Gen11 builds from the catalog come with one 800 W power supply, and the refurbished Gen10 8SFF with two Silver 4210 comes with one 500 W unit. A production server needs a second power supply, otherwise a power supply failure stops the server; the Gen10 build with 128 GB already has two.
Support timelines
HPE does not state the end date of service support in QuickSpecs. The independent tracker Park Place Technologies gives March 31, 2028 as the end of support (EOSL) for the DL380 Gen10. This is a guideline, not an official HPE date: the status of a specific server is checked by serial number on the HPE portal.
Buying a Gen10 at the end of 2026, you get about a year and a half until this guideline date. After that the server keeps working, but you should not expect new firmware and vulnerability fixes. For 1C on the internal network, backup and a test bench this is acceptable; for the perimeter and a long horizon it is not. Gen11 is on sale, and its QuickSpecs carry no discontinuation mark — this is the main argument for it when buying for five years. How end-of-sale and end-of-support dates work is covered in the article “Refurbished server or new”.
Prices in the Servix catalog as of November 2026
Prices are from the product pages, including 12% VAT. Made-to-order items: lead time 2–3 weeks, the price is fixed in the invoice.
Server | Condition | What's inside | Price |
|---|---|---|---|
refurbished | 2 × Silver 4210 (10 cores, 2.2 GHz), 64 GB DDR4, P408i-a, 1 × 500 W power supply | price on request | |
refurbished | 1 × Silver 4210R (10 cores), 32 GB DDR4, P408i-a, 1 × 800 W power supply | 33,737,000 UZS | |
DL380 Gen10 12LFF | refurbished | 2 × Silver 4210, 32 GB DDR4, P816i-a, 2 × 500 W power supplies | 36,037,000 UZS |
DL380 Gen10 8SFF | refurbished | 2 × Silver 4215R (8 cores, 3.2 GHz), 64 GB DDR4, P408i-a, 1 × 800 W power supply | price on request |
refurbished | 2 × Silver 4215R, 128 GB DDR4, P408i-a, 2 × 800 W power supplies | 45,761,000 UZS | |
DL380 Gen10, platform to your specification | slightly used or new | built to your configuration | from 38,000,000 UZS, new — 50,000,000 UZS |
new | Xeon Bronze 3408U, 32 GB DDR5, MR216i-p, 1 × 800 W power supply | price on request | |
DL380 Gen11 8LFF, 16SFF and 24SFF | new | same components, different chassis | price on request |
DL380 Gen11, platform to your specification | slightly used or new | built to your configuration | from 49,000,000 UZS, new — 67,000,000 UZS |
We quote the price of ready-made Gen11 builds on request, while the Gen11 platform costs from 49 million UZS — more than a refurbished Gen10 with two processors for 36–46 million UZS. But you need to compare what is inside: for this money a Gen10 gives 16–20 cores and 32–128 GB, while a ready-made Gen11 gives 8 Bronze cores at 1.8 GHz, 32 GB and one power supply. The Gen11 is then upgraded with processors, memory and a second power supply, and for virtualization the total is noticeably higher than the price of the base build.
All builds with prices are in the product lines DL380 Gen10 and DL380 Gen11; other eleventh-generation servers are in the selection guide HPE ProLiant Gen11.
Who should buy the DL380 Gen10
- The budget is limited, but two processors are needed now. For 36–46 million UZS — a ready machine with 16–20 cores, 32–128 GB and hardware RAID with cache.
- 1C in a small company. Silver 4215R at 3.2 GHz, 64–128 GB and SSDs for databases cover a typical load. Sizing by the number of users is in the selection guide “Server for 1C”.
- File server and backups. 12LFF with P816i-a gives HDD capacity without paying extra for DDR5 and PCIe 5.0, which such a task does not need.
- You already have a Gen10 fleet. The same DDR4 modules, drives and iLO 5 simplify spare parts and maintenance.
- Test bench, standby node, branch office. Wherever downtime is not critical.
Who should buy the DL380 Gen11
- Virtualization. Up to 128 cores and 8 TB of DDR5 in one 2U: the same load needs fewer servers, rack units and switch ports.
- Databases and analytics. Eight DDR5 channels give a 2–3 times higher peak memory bandwidth than six DDR4 channels with Silver, and NVMe is not limited by PCIe 3.0.
- 25/100GbE networking, GPUs, NVMe storage. PCIe 5.0, two OCP 3.0 slots, U.3 tri-mode and EDSFF cages.
- A horizon of five years or more. The platform is on sale and receives updates.
One warning: a ready-made build with the Bronze 3408U cannot be expanded with a second identical processor, and a 5th generation Xeon cannot be installed in a board shipped with the 4th. For two sockets, plan a pair of 4th generation Silver or Gold right away, and for 5th generation Xeon, order the server as a platform to your specification.
Frequently asked questions
Can DDR5 memory or a Gen11 processor be installed in a DL380 Gen10?
No. Gen11 has a different processor socket and a different memory type; DDR4 and DDR5 modules are mechanically incompatible.
Can a 4th generation Xeon in a Gen11 later be replaced with a 5th generation one?
According to HPE QuickSpecs — no: the firmware for the 5th generation is incompatible with a board shipped with the 4th. In Gen10 the same rule applies to moving from the 1st generation to the 2nd.
How does a ready-made Gen11 differ from a platform to your specification?
A ready-made build is a fixed minimum configuration: Bronze 3408U, 32 GB, MR216i-p and one 800 W power supply. The platform is built to your component list, and the total depends on the processors, memory and drives.
Is a refurbished DL380 Gen10 enough for 1C?
For a small company, usually yes: processor frequency, memory and SSDs for databases matter more than the generation. The builds on Silver 4215R are the closest fit.
What is the warranty on a refurbished Gen10?
12 months, the same as for new equipment, serviced by Servix. HPE allows downloading firmware and the Service Pack for ProLiant for Gen10 without a contract.
Send to [email protected] your task (virtualization, 1C, file server, DBMS), the number of users or virtual machines, data volume, service life and budget. We will select a configuration, calculate both options — a refurbished Gen10 and a new Gen11 — and send a quote in UZS. Warranty — 12 months on new and refurbished equipment, serviced by Servix; free delivery in Tashkent; made to order — 2–3 weeks, the price is fixed in the invoice; prices include 12% VAT.
See also: HPE ProLiant DL380 Gen11: review, configurations and prices, DL360 Gen11 or DL380 Gen11: 1U or 2U, Refurbished server or new, HPE ProLiant Gen11: configurations and prices, Dell PowerEdge R750 or HPE ProLiant DL380 Gen10: which to choose, SFF or LFF: which drive bays to choose in a server.
Related reading
HPE ProLiant DL380 Gen11: review, configurations and prices
HPE ProLiant DL380 Gen11 review: 4th/5th Gen Xeon Scalable, DDR5, PCIe Gen5, iLO 6. Ready-made builds with prices in Tashkent and what to look at when ordering.
Dell PowerEdge R750 or HPE ProLiant DL380 Gen10: which to choose
R750 on Xeon Ice Lake with 32 DDR4-3200 slots and PCIe 4.0 versus DL380 Gen10 on 1st–2nd generation Xeon and PCIe 3.0: table, licenses, prices from 33,737,000 UZS.
Server fleet upgrade: when to move from Gen10 to Gen11 or Gen12
How Gen11 and Gen12 differ from Gen10, what carries over from the old server and what does not, and which signs tell you it is time to plan an upgrade.
HPE introduced ProLiant Gen12 on Intel Xeon 6
ProLiant Gen12 on Intel Xeon 6: more cores and memory channels, new iLO, firmware protection. When a generation change is justified and when Gen11 from the catalog is the better deal.




